Description: Attention : for USA buyers ,this item can free Ship from USA warehouse, delivery : 3-7 days by UPS ! ! This item includes: 1 PC Nema 23 Stepper Motor dual shaft with 425oz-in holding torque, 1 PC Stepper Driver with 4.2A DQ542MA digital series replacing M542, 1 PC Power Supply for 350W,36VDC,9.72A 1 PC DB25 Breakout Board & 1 Cable for free offering 1, Stepper Motor Technical Specifications Part No.: WT57STH115-0304B(57BYGH115-003B) Frame Size: NEMA23 Step Angle: 1.8 degree Voltage: 6.3VDC Current: 3 A/phase Resistance: 2.1Ohm/phase Inductance: 9mH/phase Holding torque: 30Kg-cm 425oz-in Rotor inertia: 810 g-cm2 Detent torque: 0.89 kg-cm Number of wire leads: 4 Weight: 1.55KG Length: 115mm 2, Stepper Motor Driver with 4.2A Current, 128 Microstep DQ542MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DQ542MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on. Features: l High performance, low price l Average current control, 2-phase sinusoidal output current drive l Supply voltage from 18VDC to 50VDC l Opto-isolated signal I/O l Overvoltage, under voltage, overcorrect, phase short circuit protection l 15 channels subdivision and automatic idle-current reduction l 8 channels output phase current setting l Offline command input terminal l Motor torque is related with speed, but not related with step/revolution l High start speed l High hording torque under high speed Electrical specification: Input voltage 18-50VDC Input current ＜ 4A Output current 1.0A～4.2A Consumption Consumption：80W； Internal Insurance：6A Temperature Working Temperature -10～45℃； Stocking temperature -40℃～70℃ Humidity Not condensation, no water droplets gas Prohibition of combustible gases and conductive dust weight 200G 3, Power Supply 350W/36VDC/9.72A 4, Breakout Board Description: Built in DB25 male connector. DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17. DB25 Input Pin: P10,P11,P12,P13,P15. DB25 GND Pin: P18-P25. Power supply: +5V DC. Built in C-class Optical-coupler. High quality with Surface-mount Tech. More Order quantites, more discount!!! Our products are mainly used in robotization, Spinning Automatization, Printing, Packing, Medica Machine, Make-up Equipment, Communication, Household Appliance, Water Pump, Milling Machine, Engraver Machine, CNC Routers.. etc automatic equipment of various trades. We ship worldwide!
Price: 75 USD
Location: CA
End Time: 2024-08-27T08:05:11.000Z
Shipping Cost: 45 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Model: 57BYGH115-003B Dual Shaft
MPN: 57BYGH115-003B CNC kit
Brand: Wantai Motor
Country of Manufacture: China
