Description: Welcome to our store! To avoid you buying the wrong parts, DO CHECK the compatible chart above before placing order. Choose a vehicle from the "My Garage" list. Or Enter your vehicles details with Year / Make / Model / Trim / Engine. Or Contact us: Ask us for double check. Engine Starter Motor For 1976-1995 Kawasaki Jet Ski 440 550 SX JS400 JS550 12V Description&Advantages 1 Year warrantyHigh Quality Product and MaterialsBuilt to strict quality control standards Direct replacement Application For KAWASAKI Personal Watercraft (PWC) JS400 1976 400cc KAWASAKI Personal Watercraft (PWC) JS440 1977 440cc KAWASAKI Personal Watercraft (PWC) JS440 1978 440cc KAWASAKI Personal Watercraft (PWC) JS440 1979 440cc KAWASAKI Personal Watercraft (PWC) JS440 1980 440cc KAWASAKI Personal Watercraft (PWC) JS440 1981 440cc KAWASAKI Personal Watercraft (PWC) JS440 1982 440cc KAWASAKI Personal Watercraft (PWC) JS440 1983 440cc KAWASAKI Personal Watercraft (PWC) JS440 1984 440cc KAWASAKI Personal Watercraft (PWC) JS440 1985 440cc KAWASAKI Personal Watercraft (PWC) JS440 1986 440cc KAWASAKI Personal Watercraft (PWC) JS440 1987 440cc KAWASAKI Personal Watercraft (PWC) JS440 1988 440cc KAWASAKI Personal Watercraft (PWC) JS440 1989 440cc KAWASAKI Personal Watercraft (PWC) JS440 1990 440cc KAWASAKI Personal Watercraft (PWC) JS440 1991 440cc KAWASAKI Personal Watercraft (PWC) JS440 1992 440cc KAWASAKI Personal Watercraft (PWC) JS550 1982 550cc KAWASAKI Personal Watercraft (PWC) JS550 1983 550cc KAWASAKI Personal Watercraft (PWC) JS550 1984 550cc KAWASAKI Personal Watercraft (PWC) JS550 1985 550cc KAWASAKI Personal Watercraft (PWC) JS550 1986 550cc KAWASAKI Personal Watercraft (PWC) JS550 1987 550cc KAWASAKI Personal Watercraft (PWC) JS550 1988 550cc KAWASAKI Personal Watercraft (PWC) JS550 1989 550cc KAWASAKI Personal Watercraft (PWC) JS550 550 SX 1990 550cc KAWASAKI Personal Watercraft (PWC) JS550 550 SX 1991 550cc KAWASAKI Personal Watercraft (PWC) JS550 550 SX 1992 550cc KAWASAKI Personal Watercraft (PWC) JS550 550 SX 1993 550cc KAWASAKI Personal Watercraft (PWC) JS550 550 SX 1994 550cc KAWASAKI Personal Watercraft (PWC) JS550 550 SX 1995 550cc Package Included 1x Starter What is a starter?A starter (also self-starter, cranking motor, or starter motor) is a device used to rotate (crank) an internal-combustion engine so as to initiate the engines operation under its own power. Starters can be electric, pneumatic, or hydraulic. The starter can also be another internal-combustion engine in the case, for instance, of very large engines, or diesel engines in agricultural or excavation applications. The following are the two major components of a starter:Contactor: The main function of the contactor is to control the electric current to the motor. A contactor can make or break power to the circuit.Overload Relay: Overheating and drawing too much current can cause the motor to burn out and become practically useless. Overload relays prevent this from happening and protect the motor from any potential danger.A starter is an assembly of these two components, which allows it to turn on or off an electric motor or motor controlled electrical equipment. The starter also provides the necessary overload protection to the circuit. How does the starter motor work?When the driver turns the key or presses the Start button, the solenoid winding is energized. The solenoid plunger moves in the direction of the arrow and closes the solenoid contacts. This connects the battery power to the starter motor (field coils and armature). At the same time, the plunger pushes the starter gear forward through the lever. The gear then engages with the ring gear of the flexplate and turns it over. The flexplate is attached to the engine crankshaft.Most of the starter problems are caused by worn out or burned solenoid contacts, worn brushes and a commutator and worn armature bushings. The symptom of worn out solenoid contacts is when the solenoid clicks but the starter motor doesnt run. When the starter brushes are worn out, the starter motor doesnt make any noises. When front and rear armature bushings wear out, the armature rubs against the field shoes causing the starter motor to run slow and noisy. Many modern starter motors have small ball bearings instead of the bushings. If you want to rebuild the starter motor, the starter motor rebuild kits that include common wear parts are sold online. Signs of Starter Motor Failure1.Buzzing NoiseIf the engine doesnt crank but a consistent buzzing sound that occurs when the key is turned, it usually means that there is a flow of electricity to the starter, but the motor is not actuating. This often means there is not enough electrical power getting to the starter to allow it to properly do its job. This is usually caused by a poorly charged battery or corrosion on the electrical connections within the starting system.2.Loud Clickingsing loud, individual click or a series of clicks that occurs when trying to start a car indicates a bad starter motor. It shows that the starter is getting the necessary electricity needed to actuate, the electric motor inside is not properly responding and has malfunctioned.3.Whirring NoiseThe pinion gear is the part of the starter that actually connects with the flywheel. If it is not engaging with the flywheel it will spin on its own and create a noise that sounds something like "whirr." This often indicates that the starter solenoid has failed.4.Grinding SoundA grinding noise that occurs when trying to start the engine is likely caused by loose starter motor. It could also mean that there are worn or missing teeth on the flywheel or pinion gear which isnt allowing the two gears to properly work together to crank the engine. Installion 1.SAFETY FIRSTDisconnect the battery. You only need to remove the negative cable. This is a good move any time you’re working on the car. NOTE: Many vehicles need to be raised up to reach the starter. On others, obtaining starter access can be difficult. Check your vehicle repair manual for location and replacement details. Always use safety stands and wheel chocks along with protective eye wear. 2.REMOVE THE WIRINGRemove the wiring and positive battery cable from the starter solenoid. 3.REMOVE THE STARTER AND BOLTSRemove the starter retaining bolts. Remove the starter. NOTE: AutoZone will test your starter for free. This will help to verify you are working on the correct problem of the car. 4.COMPARE TO VERIFYCompare the new starter to verify it will fit. Note: Some replacement starters do not appear identical but will have the same fit, form and function as the original (old) unit. Refer to product or installation bulletins packaged with the starter. 5.TRANSFER HEAT SHIELDTransfer any heat shield and/or brackets (if equipped) to the replacement starter. 6.REPLACE WITH NEW STARTERInspect the flywheel teeth for damage. Now, place the new starter in the old starter’s position. Remember the starter shim if applicable. 7.SECURE AND TIGHTENSecure and evenly tighten the starter retaining bolts. NOTE: Do NOT over-tighten. 8.CONNECT THE WIRINGConnect the wiring to the starter solenoid. 9.RECONNECT THE BATTERYReconnect the battery and fire up the engine. NotePlease check complete Year, Make, Model, Trim, and Engine Size of your vehicle in the Compatibility Chart before Purchase.If you have any question ,please contact us. Item SpecificsUPC Does not applyBrand ZoneMotiveManufacturer Part Number 10817544Manufacturer Warranty 1 YearCustom Bundle NoVoltage 12Modified Item NoProduct Type StarterRotation CCWTeeth 9KW 0.6Starter Type PMDDInterchange Part Number S108-116, 22130, 21163-3003F, 21163-3003G SND0031Other Part Number 104-171,111840, 18305,21163-3003F,WK2 211633003GCross Part Number 21163-3003YR, 21163-3710, 21163-3711, 21163-5031Referance Part Number 712518305,22130HI,410-44020,464204,491094,572764Color BlackQuantity 1Package Included 1 x StarterOutlet Size 3/8Superseded Part Number HK05236903CPInlet Type StrainerPin Quantity 4Outlet Quantity 1Terminal Type FlatTerminal Gender FemaleConnector Shape OvalIn Tank or External In TankInternal Or External Strainer InternalGasket or Seal Included YesWiring Harness Included NoPackage Included Fuel Pump Module Assembly w/Float Arm,Seal About Us: We are committed to making the best auto-parts products and providing you with better services. So if you have any quesiton or problem, please fell free to contact us about that. Payment: Paypal only. Shipping: 2-8 working days in transit. Product will be shipped within 2 business days after full payment is received and verified. USPS, UPS, FedEx shipping will be provided. Delivery time is about 2-8 business days to most of addresses. Returns: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. 30-day free return provided. Contact Us: Any quesiton or problem, do contact us please. We are always online to answer. Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
Price: 58.61 USD
Location: Ontario, California
End Time: 2025-01-04T05:46:28.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
UPC: Does not apply
Brand: ZoneMotive
Manufacturer Part Number: 10817544
Manufacturer Warranty: 1 Year
Custom Bundle: No
Voltage: 12
Modified Item: No
Product Type: Starter
Rotation: CCW
Teeth: 9
KW: 0.6
Starter Type: PMDD
Interchange Part Number: S108-116, 22130, 21163-3003F, 21163-3003G SND0031
Other Part Number: 104-171,111840, 18305,21163-3003F,WK2 211633003G
Cross Part Number: 21163-3003YR, 21163-3710, 21163-3711, 21163-5031
Referance Part Number: 712518305,22130HI,410-44020,464204,491094,572764
Color: Black
Quantity: 1
Package Included: Fuel Pump Module Assembly w/Float Arm,Seal
Outlet Size: 3/8
Superseded Part Number: HK05236903CP
Inlet Type: Strainer
Pin Quantity: 4
Outlet Quantity: 1
Terminal Type: Flat
Terminal Gender: Female
Connector Shape: Oval
In Tank or External: In Tank
Internal Or External Strainer: Internal
Gasket or Seal Included: Yes
Wiring Harness Included: No
