Description: EGW Savage Short Action 110 Series Picatinny Scope Mount Rail 0 MOA EGW Hunter Series Savage 110 Round Back Short Action Picatinny Rail 0 MOA Our Hunter series picatinny scope mount. We saw the need for a shorter, lighter, heavy duty, picatinny scope mount and this is what we came up with. After countless hours of prototyping and testing, the Hunter mount was born. Featuring: 7075 T6 aluminum for an extremely durable yet lightweight construction. Type III hardcoat anodizing protects the mount from whatever nature can throw at it. Chamfered edges provide a snag free hunt. A compact overall length sheds 15% of its weight compared to our other Heavy Duty mounts. This mount comes standard with a bevel on both sides making it ambidextrous. Due to the change in which receivers have #6 and #8 screws from Savage, we recommend you remove and measure one of the screws prior to purchasing our scope mount. This will ensure that you receive the correct screws necessary for your specific application. Some Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. We now have mounts drilled for #8 screws available for all MOAs. We also have a #8 Drill Out Kit available for customers who would like to drill the mounts out themselves. If you have questions about your specific firearm, or need help regarding the specific screw size, you should contact Savage Customer Support and supply them with your serial number. This mount is drilled for and provided with 6-48 Hex Head screws. We recommend reviewing our listing below for predrilled #8 mounts if you require #8 screws. Our 8-40 and 6-48 screws utilize the same head design, which allows us to use the same countersink in all of our mounts. If you purchased a mount with the incorrect screws, you can purchase our #8 Drill Out Kit. We do offer Savage rails that are pre-drilled for #8 screws. They are available here: HD Savage Round Back Short Action 0 MOA Drilled for #8-40 Screws HD Savage Round Back Short Action 20 MOA Drilled for #8-40 Screws HD Savage Round Back Short Action 30 MOA Drilled for #8-40 Screws HD Savage Round Back Short Action 40 MOA Drilled for #8-40 Screws Rifles requiring #8 screws (please check your individual rifle to be sure): 10/110 BA Stealth 10/110 Stealth Evolution 110 Scout 110 Wolverine 10 GRS 110 Tactical 110 Tactical LH 110 Tactical Desert 110 Ridge Warrior 110 Ultralite Christensen Arms Ridgeline (Please Check Your Serial Number Here) Screw Diameters #6 Screws - .13" diameter #8 Screws - .16" diameter We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov Specs: Rail Type: One Piece Picatinny Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Hardcoat Center Spread: 3.93" Overall Length of Mount: 6.025" Height: .35" (Top of Receiver to Top of Picatinny) Weight: 2 oz Quick Disconnect Ring Compatible: Yes Ambidextrous: Yes Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Mounting Hardware is Included This mount fits: Savage Model 10 with Accu-Trigger Short Action Round Rear Receiver Savage Model 11 with Accu-Trigger Short Action Round Rear Receiver Savage Model 12 with Accu-Trigger Short Action Round Rear Receiver Savage Model 14 with Accu-Trigger Short Action Round Rear Receiver Savage Model 16 with Accu-Trigger Short Action Round Rear Receiver Savage Model 110 with Accu-Trigger Short Action Round Rear Receiver Stevens Model 200 Short Action Round Rear Receiver This mount does not fit: Savage Edge Savage Axis Savage Axis II Savage Model 25 Savage Short Actions with Flat Rear Receivers Savage Medium Actions with Flat Rear Receivers Savage Short Actions Drilled for #8 Screws Please check your mounting screw diameter and hole spacing before placing your order to ensure you select the correct mount. Screw diameter and hole spacing information can be found in the description tab below. Please note not all parts are "drop in". As with all gun parts some installations may require disassembly and reassembly. Some parts may require installation by a qualified gunsmith. !!ALWAYS MAKE SURE YOUR FIREARM IS UNLOADED BEFORE PERFORMING ANY MAINTAINANCE OR UPGRADES!! No Liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This product should be installed and checked by a qualified gunsmith. Not doing so or using the wrong tools may damage the part and/or your firearm. All Products are made in the USA by Americans. Should you have any questions or issues with your new product please contact me. It is my goal to make my customers 100% satisfied with their purchase (within reason). ***Please Note: All returns MUST Be In Original Packaging and in a resalable, brand new condition. Item(s) must be in new/unused/unworn condition for an exchange/refund. Application errors will incur a minimum of 15% restocking fee. If you are not sure of the product and its use please contact The Sporting Jack for applicability and questions. Used and/or damaged items must be exchanged through the specific manufacturer for warranty issues. If you have any questions or Issues, we are here to help. The Sporting Jack Outfitters is a Certified Service-Disabled Veteran-Owned Small Business. Thank you for your business-Dave Kravetz
Price: 69.99 USD
Location: Victor, New York
End Time: 2024-11-19T17:21:12.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Evolution Gun Works
Type: Scope Bases
For Gun Make: Savage
For Gun Type: Rifle
Gauge/Caliber: all
Material: Aluminum
Model: 51000
Mounting: Picatinny
Mounting Location: Reciever
Sport/Activity: Shooting
California Prop 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Color: Black
Country/Region of Manufacture: United States
Features: Lightweight
Handedness: Ambidextrous
Item Height: .4
Item Weight: 3.8
Item Width: 0.835 inches
Manufacturer Warranty: Lifetime
Set Includes: Screws and Torx Bit
Unit Quantity: 1
Unit Type: each
MPN: 51000
