Description: EGW Remington 600 / 660 Mohawk Picatinny Rail Scope Mount 0 MOA Evolution Gun Works EGW Our Remington 600 Standard Action and Long Action mounts are made specific to the guns. The middle spread is the distance between the two middle holes, center to center, on your receiver. This mount is available with a 0 MOA. We recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Please see our FAQ section for more information on action lengths and MOA. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Add EGW's Practical or HD Scope Rings to make it a complete overhaul! Available in matte black. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Please give us a call if you'd like to place a custom order). This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Description Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: Socket Head Torx® Screws and Wrench Provided *The center spread is the distance between the two middle holes, center to center, on your receiver. These bases sit at approximately 0.35" high. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. Compatible with Picatinny or Weaver scope rings. Add EGW's HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW's products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). All products are made in the USA by Americans. The Sporting Jack Outfitters is Veteran Owned Should you have any questions or issues with your new grips please contact me. It is my goal to make my customers 100% satisfied with their purchase. Thank you for your business. Dave Please note not all parts are "drop in". As with all gun parts some installations may require disassembly and reassembly. Some parts may require installation by a qualified gunsmith. !!ALWAYS MAKE SURE YOUR FIREARM IS UNLOADED BEFORE PERFORMING ANY MAINTAINANCE OR UPGRADES!! No Liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This product should be installed and checked by a qualified gunsmith. Not doing so or using the wrong tools may damage the part and/or your firearm. All Products are made in the USA by Americans. Should you have any questions or issues with your new product please contact me. It is my goal to make my customers 100% satisfied with their purchase (within reason). ***Please Note: All returns MUST Be In Original Packaging and in a resalable, brand new condition. Item(s) must be in new/unused/unworn condition for an exchange/refund. Application errors will incur a minimum of 15% restocking fee. If you are not sure of the product and its use please contact The Sporting Jack for applicability and questions. Used and/or damaged items must be exchanged through the specific manufacturer for warranty issues. If you have any questions or Issues, we are here to help. The Sporting Jack Outfitters is a Certified Service-Disabled Veteran-Owned Small Business. Thank you for your business-Dave Kravetz
Price: 35.99 USD
Location: Victor, New York
End Time: 2024-11-18T17:07:14.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Evolution Gun Works
Type: Scope Bases
For Gun Make: Remington
For Gun Type: Rifle
Gauge/Caliber: all
Material: Aluminum
Model: 40500
Mounting: Picatinny
Mounting Location: Reciever
Sport/Activity: Shooting
California Prop 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Color: Black
Country/Region of Manufacture: United States
Features: Lightweight
Handedness: Ambidextrous
Item Height: .4
Item Weight: 3.8
Item Width: . 0.835 inches
Manufacturer Warranty: Lifetime
Set Includes: Screws and Torx Bit
Unit Quantity: 1
Unit Type: each
MPN: 40500
