Edelbrock Pro-Flo XT EFI Intake Manifold for Chevrolet 302-400 Small Block 7137

Description: Edelbrock Pro-Flo XT EFI Intake Manifold for Chevrolet 302-400 Small Block 7137 DescriptionBRAND NEW IN BOX DESCRIPTION: Edelbrock Pro-Flo XT EFI Intake Manifold For Chevrolet 302-400 Small-Block V8 DETAILS: Edelbrock part #7137 Pro-Flo XT intake manifold is designed for 1957-86 S/B Chevy. This manifold is engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000 rpm). This Pro-Flo XT EFI intake accepts Edelbrock Pro-Flo XT Throttle Bodies and Fuel Rails (Sold Separately). SPECS: Availability Available Application Application Specific UPC 00085347071371 Series Pro-Flo XT Gasket Or Seal Included No Vehicle Model Chevrolet Availability Note Available Warranty 12 Months Ec Basic Operating Rpm Range 1500-7000 RPM Emissions Code Racing Only – Pre Pollution Controlled Vehicles Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. Installation Notes Recommended gasket: Edelbrock #7201; Manifold Dimensions: A-9.00", B-8.20", C-14.80"; Compatible with Edelbrock #3869 or #38693 90mm Pro-Flo XT Throttle body.; Machined for a Edelbrock #36019 LS1 style MAP sensor, which mounts directly on the manifold.; The Edelbrock #3627 Fuel rail kit including provisions for either Pico or standard height injectors is available separately.; The throttle body centerline is located 2.5" behind and 6.07" above the front edge of the front end seal surface.; Fits late model low profile water neck (such as TransDapt 9929 or GM 12342024 chrome thermostat housing); No provisions for exhaust heated chokes or EGR.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; To ensure maximum performance and a proper seal, Edelbrock gaskets which are specifically designed and manufactured for use with Edelbrock parts must be used.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. Center Maximum Height 9.000 in CNC Ported No Finish Satin Front Maximum Height 9.000 in Material Aluminum Rear Maximum Height 8.200 in Single Or Dual Plane Type Single ABOUT THE MANUFACTURER : Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation's premier designers, manufacturers and distributor of performance replacement parts for the automotive aftermarket. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses five locations in Southern California and one location in North Carolina totaling more than 500,000 square feet.Edelbrock Corporation has six locations: Three in Torrance California, two in San Jacinto, California, and one in Sanford North Carolina totaling over 500,000 square feet. Torrance Headquarters include: R&D; manufacturing; state-of-the-art testing facilities, advertising and tech support. Less than a mile away is Russell Plumbing and our Distribution Center.Our Aluminum Foundries are located close by in San Jacinto. In 2008 we added a new Permanent Mold and Heat Treat facility next to our existing sand cast foundry, which has been called "the most state-of-the-art sand cast foundry west of the Mississippi." This investment in American facilities is part of our commitment to "Made in USA" products and performance.Ask us about saving money with our PACKAGE DEALSCP Cometic ACL Ferrea and ARP KitsCustom Made Package DealsAEM Package DealsPackage DealsAsk us about combining purchases for package deal auctionsPistonsRodsBearingsHead and Main Studsand more...ShippingWe ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently.We also offer expedited shipping at an extra cost.International shipping rate applies to addresses in all other locationsCustom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.Item ships within one business day after the payment has cleared or same day if paid by 12pm PST unless additional handling stated. Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.There's a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes and any address that is out of 48 lower states. Please contact prior to get a shipping quote.We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.Ebay Promotional Shipping is good for shipments going to 48 lower states only.We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.Shipping charges are non-refundable.We will gladly combine shipping charges to one charged based on the total weight of the package. OFEPayment & ReturnWe require that all payments be paid through PayPal. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted. Per our return policy this item can be returned in 30 days, buyer is responsible for the return shipping, 20% restocking fee may apply.International Buyers, please contact us before bidding to discuss the shipping cost.We always look to satisfy our customers in whatever needs they may have. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.

Price: 620.03 USD

Location: San Diego, California

End Time: 2024-10-15T17:36:00.000Z

Shipping Cost: 0 USD