Dual Spark Arrestor End Caps Pro Moto Billet PMB-01-1118

Description: CA Emissions Info Shipping Contact Us Item Availability Returns IMPORTANT CALIFORNIA SPECIFIC EMISSIONS NOTICE California laws prohibit (in most cases) the use of any aftermarket product whose installation requires the removal of any emissions control related components as regulated by the California Air Resources Board (www.arb.ca.gov). Three classification levels of emissions related aftermarket products define which aftermarket parts can be sold legally in the state of California: Replacement Parts parts that have the same function and affect on emissions as the parts they are replacing. This means that if a vehicle was not originally equipped with a catalyst and all other emissions related controls that were connected (such as oxygen sensors) are reconnected, then the part is considered a Replacement Part. If the vehicle has a catalyst and the installation of the part does not remove the catalyst, and all other emissions related controls are reconnected, then this is considered a replacement part. Slip on mufflers in applications whereby the catalyst is not contained in the original muffler is an example of a replacement part. Full exhaust systems installed on vehicles that did not originally contain a catalyst and whereby the design allows the reinstallation and original function of any other emissions control related components are also considered replacement parts. Modified Parts parts that alter the emissions control related performance from the original part they are replacing, These parts may have catalysts in them but they perform differently from the original equipment part or they may require the alteration or elimination of other emissions related control components such as oxygen sensors. These parts must obtain an Executive Order ("EO") from the California Air Resource Board (C.A.R.B.) to confirm their functional compliance in order to be sold legally in California. Competition or Racing Vehicle Parts parts that are used exclusively in competition on race only vehicles. These parts do not require approval as long as they "are not used on public highways". Labeling a product as being for "Racing Only" or "Closed Course Competition" is not sufficient for it to be included under this classification. It must be a competition vehicle and must not be used at any time on a public highway. Many exhaust systems, intake kits, fuel tuners, and performance parts we sell are specifically designed and designated as/for "Competition and Racing Vehicles Only". Any/All model application pictures shown are for reference only and solely intended for Competition and Racing Vehicles only and must not be used at any time on a public road/highway. If an item is designated as "Competition and Racing Vehicles Only", we will require a race waiver be digitally signed before an item can ship to California. If an item is to be exported from California, an export waiver is available as well. This is a REQUIRED guarantee from you that a restricted item will NOT be used on any public highway in California; only on private race tracks in racing or competition use. Many "Modified Parts" are sold with out restriction in California and will be identified with a C.A.R.B. "EO" number and will arrive with appropriate labels to indicate the approved status. If you're not sure about the California emissions status of an item, please contact us for clarification before placing your order More Info From The Motorcycle Industry Council Check the shipping calculator for estimated shipping costs. If your location isn't shown, or shipping cannot be calculated for your location, please contact us for a shipping price. International buyers are responsible for duty and VAT charges. We do not collect those fees, we do not have control over them, nor do we know how much they will be for any given country. Our retail/internet/mail order warehouse is in the Gorman, California area between Los Angeles and Bakersfield. All items are available for local pick up, but please contact us to make arrangements before hand. Some high-value items will require signature for delivery. Open 7 Days A Week! Mon.-Sat. - 8am-5pm PST Sunday - 8am-Noon PST Contact us through ebay. Click "Ask a question" at the bottom of the description. Please check the estimated delivery date shown in the shipping tab, these are updated daily based on current inventory across all of our warehouses. We always try to meet or beat these stated delivery times. Some items are made to order and can have longer lead times; check the shipping details for an estimate. Please contact us for expedited shipping options if needed. All exchanges and returns must be in the original packaging, with all directions & accessories, in new condition. Please contact us with any questions. PMB-01-1118 Product Details: The Fastway Spark Arrestor End Cap is designed as an efficient way to convert your stock muffler into a U.S.F.S. approved spark arrested muffler. When the spark arrestor screens are not required, such as at the MX track, simply remove two machine screws on each end cap and take out the screens. Each end cap is machined out of solid 6061 aluminum and anodized with a protective finish. Designed to quickly and easily convert stock, 4-strokes and some 2-strokes, to United States Forest Service (U.S.F.S.) approved mufflers.Precision engineered, manufactured, and assembled in the U.S.A.6061 billet aluminum constructionU.S.F.S. approved Vehicle FitmenttypeyearsmakemodelenginerequiredlocationnotesMotorcycle18-20HondaCRF250R2491 Motorcycle19-20HondaCRF250RX2491 Thanks for shopping with us ! Starcycle USA has been serving the world's motorcyclists since 1968. Our retail/internet/mail order warehouse is in the Gorman, California area between Los Angeles and Bakersfield. All items are available for local pick up, and installation! If you'd like to make an appointment for service contact us.

Price: 259.95 USD

Location: Lebec, California

End Time: 2024-12-30T05:12:59.000Z

Shipping Cost: 0 USD