DUAL MOTEC M142 LAMBORGHINI HURACAN / AUDI R8

Description: Brand new and un used, slave ecu already has flex fuel wiring. This kit is a complete replacement for the two factory ECUs, utilizing existing wiring, sensors and mounting hardware to deliver plug-in convenience with fully programmable control. The M1 ECUs are supplied with firmware preloaded, providing all the functionality of MoTeC’s GPR-DI Package, plus Engine Torque Control and additional features unique to the Lamborghini Huracan 2014.The kit is comprised of a Primary ECU, in which all tuning adjustments are made, and a Secondary ECU that mimics settings from the Primary. After initial (pre-configured) setup, only the Primary ECU requires connection to M1 Tune for adjustments. Along with fuel, ignition and camshaft control, this kit also supports other OE ECU features.ADVANTAGESFully configurable launch control strategy for optimal launches on any surfaceFully configurable traction control to maximize acceleration and safetyAnti-lag and rolling anti-lag feature for instant boost responseMotec controlled RPM shift targets to optimize accelerationSafety features that are especially important for a turbocharged engine that can reduce/limit power and/or shut down engine in case of:low oil pressure, low oil levelhigh coolant temperaturelow fuel level and/or pressureloss of coolantPotentially engine damaging knock eventsOver-boost conditionsIntake air temperature too high (air to water intercooler pump failure)Cold start protection – protects engine from abuse when engine is not up to temperatureClutch slip protectionLean air/fuel conditionsAdvanced fuel system control allowing for different fuel pumps (low side and high pressure) and injectors(DI/PI) to be used including Flexfuel E85/ethanol tuningDriver selectable mapping switching for different power levels, traction control level, launch control level, and many more!Advanced logging of over 900 parameters that can be used for diagnosis or improving the performance of the vehicleRemote tuning & logging capabilitiesFEATURESPush button start7-Speed DSG transmission integrationOptional boost control via wastegate solenoids or servosAir conditioner controlHigh and low speed fan controlAdjustable driving modes (Strada, Sport, Corsa)Fuel canister purge valve controlEngine speed matching (throttle blip) on downshiftsFuel Lift Pump and Coolant Pump controlReverse lockoutCruise controlIntegrated electronics for OE Lambda SensorsAll OE dash functionality including warningsThe supplied start files contain all the calibrations and settings for the sensors, direct fuel injectors, port fuel injectors, ignition coils, knock control, throttle servos and camshafts. They have also been calibrated to match the OE factory fueling, ignition and camshaft phasing. This saves a significant amount of time by shortcutting the setup process. Users can begin tuning to their desired power level right away with the assurance of a safe base tune that is equivalent to the original vehicle.Included are many ancillary features commonly found on race cars, such as anti-lag, driver switches (e.g. pit switch, launch enable, boost trim), gearbox control, knock control, intercooler sprays, launch control, coolant pumps and traction control.The product fully integrates with other MoTeC devices, providing pre-defined CAN messaging for all current Displays/Loggers, LTCs, E888, Video Capture Systems, GPS, ADR, BR2, PDMs and SLMs. COMPATIBILITYThis product includes CAN messaging for full OE vehicle integration. The Package caters for OE vehicle systems such as power steering, ABS, starting systems and dashboards.Lamborghini Huracan 2014-2018 LP610-4 (DSG)Lamborghini Huracan 2017-2018 LP640-4 (DSG)Audi R8 (2nd generation) 2016 Type 4S (DSG) NOTESDual M142 Kit Includes Level 3 Logging

Price: 11300 USD

Location: Fort Lauderdale, Florida

End Time: 2024-10-20T02:06:10.000Z

Shipping Cost: 0 USD