Dive Rite - Voyager Series 35LB Wing EXP Series

Description: Dive Rite - Voyager Series 35LB Wing EXP Series The Voyager Series wings, donut-shaped air cells for single-tank diving, provide divers essential buoyancy control. With 35 lbs. (15.8 kg) of lift, streamlined side panels, and their minimalist, oval shape, the wings’ design provides maximum comfort throughout the dive with no squeezing or restrictions. The donut-shape design provides greater stability and control while diving by keeping an even volume of inflation on the top, sides, and bottom. This, along with an integrated Gusset Control System (GCS) that reduces “taco” effect and promotes effective streamlining, puts buoyancy where it is most needed (throughout the torso supporting the weight of the tank) for superior horizontal trim. The GCS is not like a bungee wing because it does not restrict airflow; instead, the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its full capacity. Even floating on the surface, the Voyager Series wings excel by keeping the diver in a vertical position when used in conjunction with a harness and crotch strap; it won’t tip you over. Divers may choose from our durable 1680 ballistic nylon EXP material, available in 5 different color combinations, or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon diver's side panel. Both the Voyager EXP (Model BC4700) and Voyager XT (Model5200) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder. Equipped with a choice of a 12- or 16-inch elbow or a 16-inch rapid exhaust (pull dump), appropriate low-pressure inflation hose, and two sets of marine-grade 316 stainless steel grommet mounting holes for attaching the wing to a harness, the Voyager Series can accommodate any diver’s needs. As a part of our modular BCD system, the Voyager Series wings can be matched with either a TransPac® XT, Transplate, or any metal back plate and webbing harness. Made in the USA. Technical Details Model BC4700 Voyager EXP: Durable 1680 denier ballistic nylon (highly resistant to pinches and punctures) Available in 5 color combinations: Black/Grey (Standard), Black/Red, Black/Pink, Black/Blue, and OD Green (Limited Edition) Model BC5200 Voyager XT: SuperFabric brand technology outer shell and 1680 ballistic nylon diver’s side panel (extremely resistant to pinches and punctures) Inner bladder: 210-denier nylon laminated (highly resistant to pinches and punctures) Wing Gusset Control system for streamlining Lift: 35 lbs. (15.8 kg) LP inflator hose 16-inch rapid exhaust (pull-dump) or 12- or 16-inch elbow Mounting: Two sets of marine-grade 316 stainless steel grommet holes are used to attach wing to harness and set diver trim Urethane flanges: Welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools Weight: 2.8 lbs. (1.27 kg) Size: 22-in. H x 19-in. W (55.8cm x 48.3cm) Made in the USA Dive Rite - Voyager Series 35LB Wing EXP Series The Voyager Series wings, donut-shaped air cells for single-tank diving, provide divers essential buoyancy control. With 35 lbs. (15.8 kg) of lift, streamlined side panels, and their minimalist, oval shape, the wings’ design provides maximum comfort throughout the dive with no squeezing or restrictions. The donut-shape design provides greater stability and control while diving by keeping an even volume of inflation on the top, sides, and bottom. This, along with an integrated Gusset Control System (GCS) that reduces “taco” effect and promotes effective streamlining, puts buoyancy where it is most needed (throughout the torso supporting the weight of the tank) for superior horizontal trim. The GCS is not like a bungee wing because it does not restrict airflow; instead, the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its full capacity. Even floating on the surface, the Voyager Series wings excel by keeping the diver in a vertical position when uséd in conjunction with a harness and crotch strap; it won’t tip you over. Divers may choose from our durable 1680 ballistic nylon EXP material, available in 5 different color combinations, or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon diver's side panel. Both the Voyager EXP (Model BC4700) and Voyager XT (Model5200) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder. Equipped with a choice of a 12- or 16-inch elbow or a 16-inch rapid exhaust (pull dump), appropriate low-pressure inflation hose, and two sets of marine-grade 316 stainless steel grommet mounting holes for attaching the wing to a harness, the Voyager Series can accommodate any diver’s needs. As a part of our modular BCD system, the Voyager Series wings can be matched with either a TransPac® XT, Transplate, or any metal back plate and webbing harness. Made in the USA. Technical Details Model BC4700 Voyager EXP: Durable 1680 denier ballistic nylon (highly resistant to pinches and punctures) Available in 5 color combinations: Black/Grey (Standard), Black/Red, Black/Pink, Black/Blue, and OD Green (Limited Edition) Model BC5200 Voyager XT: SuperFabric brand technology outer shell and 1680 ballistic nylon diver’s side panel (extremely resistant to pinches and punctures) Inner bladder: 210-denier nylon laminated (highly resistant to pinches and punctures) Wing Gusset Control system for streamlining Lift: 35 lbs. (15.8 kg) LP inflator hose 16-inch rapid exhaust (pull-dump) or 12- or 16-inch elbow Mounting: Two sets of marine-grade 316 stainless steel grommet holes are uséd to attach wing to harness and set diver trim Urethane flanges: Welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools Weight: 2.8 lbs. (1.27 kg) Size: 22-in. H x 19-in. W (55.8cm x 48.3cm) Made in the USA × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like Ammonite System - Modular Goodman Handle Atomic Aquatics - Open Heel Splitfin Oceanic - CDX 1st Stage Regulator Oceanic - Slimline 3 Octopus 2nd Stage Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Paragon Dive Group Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 384 USD

Location: Tucson, Arizona

End Time: 2024-08-13T12:08:39.000Z

Shipping Cost: 0 USD

Product Images

Dive Rite - Voyager Series 35LB Wing EXP Series

Item Specifics

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

Price: 384 USD

Available Quantity: 1

Quantity Sold: 0

Dive Rite - Voyager Series 35LB Wing EXP Series

Product Images

Item Specifics

Available Variations

Color: Black

Color: Black

Color: Black

Color: Black

Color: Black

Color: Black

Color: Black

Color: Black

Color: Black

Color: Red

Color: Red

Color: Red

Color: Red

Color: Red

Color: Red

Color: Red

Color: Red

Color: Red

Color: Pink

Color: Pink

Color: Pink

Color: Pink

Color: Pink

Color: Pink

Color: Pink

Color: Pink

Color: Pink

Color: Blue

Color: Blue

Color: Blue

Color: Blue

Color: Blue

Color: Blue

Color: Blue

Color: Blue

Color: Blue

Color: OD Green

Color: OD Green

Color: OD Green

Color: OD Green

Color: OD Green

Color: OD Green

Color: OD Green

Color: OD Green

Color: OD Green

Recommended

Dive Rite - Folding Changing Mat

Dive Rite - LX20+ Handheld Primary Light

Dive Rite FS HP Valve 21 (HP Seat)

Dive Rite Transpac - Medium Size

Dive Rite Basic Harness

Dive Rite - O2ptima CM Hat

Dive Rite Weight Pocket System 12lb (Ac3210)

Dive Rite Nomad Ray Sidemount System

Dive Rite Sidewinder Cave Explorer Reel 900' #24 Lline

Dive Rite Xt Regulator