Dillon XL1050 XL1100 Spill Stop Locator Rails

Description: Dillon XL1050 XL1100 Spill Stop Locator Rails. Condition is "New". Shipped with USPS First Class. This is an addition to your loaded to be used with the stock locator pins (not included). It will reduce the shell wobble as the press cycles. This may help prevent powder spillage or bullet movement. The tabs allow removal while minimizing accidental displacement. These are much easier to remove than the pin by itself. I am including one extra spare, so you will get a total of 8 locator rails. 1 specific for the rear of the press near the spring as shown in the pictures, 1 short (1arm) for the eject station to accommodate shell ejection, and 6 with 2 arms (1 for spare). If the one spare is needed for the eject station, you only need to trim one arm. The price is for 1 set. I have included options for ordering 2, 3 or all 4 different sizes. If you want to order 2 or 3 sets of different sizes, please specify in the order which sizes you want. For example, if you want 2 different sizes, order the MPN # 2 different sizes. Then in the message to seller, please specify in the numbers you want, like #2 and #3. This will work with Dillon XL1050 and XL1100 loaders. #1 corresponds to Dillon locator pin 1. #2 corresponds to Dillon locator pin 2 #3 corresponds to Dillon locator pin 3 #4 corresponds to Dillon locator pin 4. If you are unsure which you want, see the link below to the Dillon caliber conversion chart. You need to look at what pin is included in your conversion kit. http://dillonprecision.com/docs/caliberconversioncharts/XL_650_Caliber_Conversion_Chart.pdf The material is PLA. It is close to Dillon blue

Price: 20 USD

Location: Oxford, Michigan

End Time: 2024-11-16T13:14:05.000Z

Shipping Cost: N/A USD