DBX 231S 2-Channel, 31-Band, 1/3 Octave Graphic Equalizer

Description: Exceptional sound and rugged reliability. With the dbx heritage of revered pro EQs, the 231s Dual-Channel 31-Band Graphic Equalizer allows for sound frequency control in the most demanding sound reinforcement environments while offering the simplicity of straightforward faders and controls. The dbx 231s includes two channels of 31-band channel of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm non-conductive sliders, an easy-to-use interface, and LED output level metering. From its extremely wide frequency response and 112 dB dynamic range to the high-quality components and meticulous attention to detail, you can be sure the 231s will offer exceptional sound and rugged reliability. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 231s is yet another tool in the growing lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound.FeaturesDual 31-band, 1/3-octave Constant Q frequency bandsSwitchable boost/cut ranges of ±6 or ±12dBFront panel bypass switchXLR and 1/4" TRS inputs and outputs4-segment LED ladders for output monitoringSpecificationsInput Connectors: 1/4" TRS, female XLR (pin 2 hot)Input Type: Electronically balanced/unbalanced, RF filteredInput Impedance: Balanced 40 kΩ, unbalanced 20 kΩMax Input: >+21 dBu balanced or unbalancedCMRR: >40 B, typically >55 dB at 1 kHzOutput Connectors: 1/4" TRS, male XLR (pin 2 hot)Output Type: Impedance-balanced/unbalanced, RF filteredOutput Impedance: Balanced 100 Ω, unbalanced 50 ΩMax Output: >+21 dBu balanced/unbalanced into 2 kΩ or greater; >+18 dBm balanced/unbalanced (into 600 Ω)Bandwidth: 20 Hz to 20 kHz, +0.5/-1 dBFrequency Response:50 kHz, +0.5/-3 dBDynamic Range: Typically >112 dBSignal to Noise Ratio: Typically >95 dBTHD+Noise:Interchannel Crosstalk:Bypass Switch: Bypasses the graphic equalizer section in the signal pathLow Cut Switch: Activates the 50 Hz 12 dB/oct. high-pass filterRange Switch: Selects either ±6 dB or ±12 dB slider boost/cut rangeOperating Voltage: 100-240VAC 50/60 HzPower Consumption: 15 WPower Connector: IEC receptacleDimensions (H x W x D): 3.5" x 19" x 6" (8.9 x 48.26 x 15.24 cm)Weight: 6.2 lbs.(2.81 kg)

Price: 289 USD

Location: Verona, Wisconsin

End Time: 2024-04-11T16:14:35.000Z

Shipping Cost: 0 USD