dB Technologies INGENIA IG4T Powered Speaker+RCF SUB 702-AS MK3 Subwoofer +Pole

Description: Package Includes: dB Technologies INGENIA IG4T 2-Way Pro Powered Speaker 900W RMS AmplifiedRCF SUB 702-AS MK3 12" Portable High-Power Active Subwoofer For DJ & Live SoundProX X-SPAM20 Deluxe 20 inch Speaker Subwoofer Pole M20 Threaded Mount 1 3/8 In. Adapter Cap dB Technologies INGENIA IG4T 2-Way Pro Powered Speaker 900W RMS Amplified INGENIA series embodies a longtime experience in acoustics, mechanics, power electronics and DSP programming, combined with talent and intuition in order to create an unprecedented active speaker: compact, modular, flyable, user-friendly and incredibly smart. The INGENIA IG4 T is equipped with 4 premium 6.5 low frequency transducers and 1 1.4"compression driver. All models of the series are designed to work individually, but they can also be coupled by simply turning one speaker upside down and placing it upon the other one. Thanks to infrared technology, INGENIA detects the presence of a second speaker, and an onboard-configuration wizard automatically sets up the system in order to ensure the best coverage and acoustic coherence. INGENIA’s horn design is horizontally symmetric and vertically asymmetric: this way, horizontal dispersion is wide and constant while vertical dispersion is narrow in the upper part and wider in the lower part. Thanks to such feature, when 2 Ingenias are coupled high frequencies add up avoiding any interferences. In addition to that, a sophisticated digital steering function process each way of the speaker in order to adjust the dispersion without moving the box. As a result, the whole audience enjoys a perfect intelligibility. Users can easily control the system through an intuitive OLED display. In fact, behind the simple interface runs a cutting-edge processing which manages mix, coverage steering, EQs levels and input devices. INGENIA can be easily and safely coupled through a LP-IG accessory which fits all the 4 INGENIA models. Moreover, feet and recessions on the top and the bottom of the enclosure ensure the speakers to be perfectly aligned, avoiding any incorrect setup operation. Ingenia DRK-IG flybar adapts to all the speakers of the series allowing to fly coupled speakers in a vertical array. Features WORK AS STAND-ALONE SYSTEM OR IN COUPLE CEC HORN TECHNOLOGY (ASYMMETRICAL VERTICAL COVERAGE) ADVANCED DSP FEATURING LINEAR PHASE FIR FILTERS DIGITAL STEERING COVERAGE ELEMENT POSITION DETECTION (IR PORT) OLED DSP INTERFACE RAPID LOCK SYSTEM RCF SUB 702-AS MK3 12" Portable 12" High-Power Active Subwoofer For DJ and Live Sound Applications. Features 1400 Watt Class-D Amplifier 12” Woofer, bass reflex housing Stereo Crossover Switchable Crossover Frequencies Polarity-reverse switch Electronic equalization, soft limiter and protection Stereo XLR input, Stereo XLR signal output Bass Motion Control excursion management The SUB 702-AS mk3 is a portable 12" high-power active subwoofer for live sound applications. It features a state-of-the-art transducer with a high-power ceramic magnetic circuit and a powerful Class-D amplifier that delivers sound pressure levels up to 129 dB with exceptional headroom. Designed as the ideal complement for 8" or 10" loudspeakers, it provides outstanding performance in any application. Rear panel controls include volume, EQ, polarity, and crossover frequency selection. The rugged all-wood cabinet with scratch-resistant polyurea coating makes it durable, easy to carry and install securely. With its versatility, sound quality, and high power output, the SUB 702-AS MK3 is perfect for small to mid-sized venues and portable applications. Legendary subwoofers RCF subwoofers are the first choice of many sound engineers, thanks to the very high SPL levels at very low frequencies, small dimensions compared to the competitors, self-powered design, long-term reliability, and impressive size/weight to SPL output ratio. Your crowd will be able to live an engaging immersive experience in both live sound or DJing applications. Power That Moves RCF's improvements in transducer design make them stronger and more powerful so the amplifier follows the evolution. With 1400W peak power, the Class-D amplifier manages extreme sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. The speaker design is energy-efficient so there's no need for a cooling fan. The amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet with no moving parts. The stereo input circuit with crossover features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. RCF amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. SUB 7 Series subwoofers can be configured from the rear panel, and features a full set of commands X-OVER PRESET 80Hz/120Hz POLARITY REVERSE OUT SIGNAL, LINE / HIGH PASS Bass Motion Control When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules. Tour-Ready Workhorse The subwoofer is suitable for a wide range of live sound applications. The rugged all-plywood cabinet is easy to carry and stack, due to its light-weight. All are equipped with ergonomic handles with rubber grips for easy set-up and tear down. The M20 threaded pole mount on the top allows the cabinet to support speakers with a pole mount. The heavy-duty polyurea coating, the powder-coated metal grille, and the rugged structure of the cabinet withstand long-term use and transportation. Separate housing for the amplifier guarantees component efficiency and reliability. An acoustically transparent sound foam backing on the inside of the grille ensures protection from dust and humidity. With its frontal vented ports, the subwoofer can also be used in recessed spaces. ProX X-SPAM20 | 20mm Threaded Deluxe Subwoofer Pole Mount | W-1 3/8 I Inch Adapter Description The ProX X-SPAM20X2PKG is a package of two X-SPAM20 adjustable loudspeaker poles with an M20 thread and an included carrying bag. Height adjustment is easy just mount to the top of a subwoofer with M20 thread and other end mounts to 1 3/8" speaker pocket Pole is adjustable from 32" up to 63" total height. All Steel Construction with a built-in Safety Pin and Easy-Grip Tension Knob Height Adjustment.More and more pole mount subwoofers are now equipped with an M20 threaded pole mount instead of a standard 1 3/8" socket cup. This type of screw attachment provides for no tilt or wobble! The X-SPAM20 is designed for the modern production style of subwoofers as well as the original 1 3/8" pole pockets with the included threaded adapter to fit standard 1 3/8" pole pockets. Its all-steel shafts telescopes to the height you want, held tight with a friction locking knob backed up by a captive steel security pin. The lower shaft features steel tubing terminated with a threaded lug. The upper shaft is sized to fit satellite speakers with standard 1 3/8" pole mounts. Features Adjustable Subwoofer Poles Fits Threaded M20 Subwoofer Pole Mounts and 1-3/8" Pocket Fits Traditional 1 3/8" and Threaded M20 Subwoofer Pole Mounts Includes Removable 1 3/8" Pocket Adapter Includes ProX Carry Bag Minimum/Maximum Height: 32" to 63" 125 lbs. (56.7 kg) Weight Capacity All Steel Construction Built-In Safety Pin Ergonomic Tension Knob Height Adjustment To Fit Subwoofers with 20mm Screw pole socket or standard 1 3/8" pocket (using adapter) Including QSC KW181, KSUB, KLA181, JBL VRX900, VRX915S, VRX918S, SRX718S, PRX618S-XLF, PRX718XLF, PRX400, PRX600, PRX700, STX800 & more... Shipping Dimensions 5.00"L x 5.00"D x 36.00"H Shipping Weight: 9.00 lbs UPC 019372413271

Price: 3624 USD

Location: Brooklyn, New York

End Time: 2024-08-25T21:26:00.000Z

Shipping Cost: 0 USD