Crestron MPS-300 Multimedia Presentation System 300 Rack Mount Professional

Description: Crestron MPS-300 Multimedia Presentation System 300 Rack Mount Professional We are an Authorized Crestron Dealer! The MPS-300 is a complete presentation control and signal routing solution for boardrooms and classrooms. Integrating the control system, multimedia matrix switcher, mic mixer, audio processor, amplifier, and QuickMedia distribution center all into a single 2-space rackmount package, the MPS-300 affords considerable signal routing versatility and high-performance signal processing without the need for separate components.System SwitcherRight out of the box, the MPS-300 provides high-performance switching of 2 video and 3 RGB computer sources to a single projector or flat-panel display. Composite, S-Video, component and RGBHV signals can be routed to the appropriate inputs on the display device, with control of the display provided via Ethernet, RS-232 or IR. Input signal sensing is provided on every video and RGB input to enable auto-switching functionality and provide device power status information to the control system. Selectable sync impedance on the RGB inputs helps accommodate cable runs of varying lengths.Versatile matrix switching inside the MPS-300 actually affords some additional hidden signal routing flexibility, providing discrete switchable outputs for RGB, composite, S-Video, and component signals. For instance, Outputs 1 and 2 can function as separate composite and S-Video outputs, or as a single component output; Output 3 can be a single component, S-Video, or composite output; and Output 4 can be used for either RGB or component. Each output is fed by a separate matrix crosspoint, so they all can be active simultaneously and assigned any relevant input source.NEW! RGB Pass-thru mode provides a quick path to integration with the groundbreaking Crestron Digital Media system. With just a single 15-pin VGA cable connected to a DM-MD6X1 DigitalMedia switcher,DMC-DVI input card, or any other DM product with an RGB input, the MPS-300 automatically routes whatever video signal is selected – whether RGB, component, S-Video, or composite – allowing seamless conversion to digital for distribution to HDTV displays and projectors throughout your facility.QuickMedia® MatrixIn addition to its conventional type video inputs and outputs, the MPS-300 accommodates additional sources and display devices via the Crestron exclusive QuickMedia (QM) transport. Three QM inputs accept connections from QM Wall Plates, FlipTop Boxes, and Distribution Centers, providing an abundance of additional inputs for AV, computer, and microphone sources. Three QM outputs are also provided, each independently controllable to feed multiple displays and other devices.QuickMedia provides a very streamlined, low-cost, long-distance wiring solution. The QuickMedia transport transmits high-resolution RGB, HD video, stereo program and microphone audio signals up to 450 feet over a single inexpensive CAT5e type cable[1]. Just one CresCAT-QM cable and a QM receiver are all that is required for complete signal routing and device control, eliminating all the bulky, expensive cabling that would otherwise be needed. A full range of QM transmitters, receivers, and other products is offered by Crestron to suit any application.Touchpanel OutputAny of the QM outputs may be utilized to feed a preview signal to the system touchpanel. Additionally, one Crestron Home® (CH) CAT5 Balanced Video output is included, its signal corresponding with the first QM output, providing for simplified wiring to a complete range of Crestron touchpanels. Each QM output supports high-resolution RGB and HDTV plus audio, while the CH output is limited to standard video and HDTV only (dependent upon the capabilities of the touchpanel).8-Channel Microphone Matrix MixingTwo gated microphone/line inputs are included on the MPS-300 complete with software-switchable 48V phantom power and independently adjustable compression and limiting. Up to 6 additional microphone signals can be brought in through the 3 QM inputs, with 4-band speech-optimized equalization provided on all 8 mic channels. Sophisticated matrix mixing allows for six completely different mixes of all 8 microphones-three mixes feeding local Program, Speech, and Record outputs, and three additional mixes feeding the 3 QM outputs.Professional Audio FeaturesFive stereo audio inputs on the rear panel accept balanced or unbalanced line-level signals from computers and other program audio sources. Additional audio sources can be brought in through the 3 QM inputs. To accommodate a wide range of signals, adjustable input compensation is employed to help maintain consistent volume levels when switching between sources. Versatile matrix mixing allows the selected program signal and the 8 microphone signals to be separated or mixed in any combination to feed 3 local audio outputs, each with its own unique mix.Three “local” balanced line level outputs are provided on the MPS-300, each with independent adjustments for volume, bass, treble, and mute. The stereo PROGRAM and mono SPEECH outputs are normally intended for driving external amplification, with relay muting on each output to prevent "thumping" on power up. The RECORD output allows for a separate stereo mix to feed a recording device or assistive listening system. Ten-band graphic equalization plus 2-band parametric equalization on each output eliminates the need for expensive outboard audio processors, and up to 40mS delay adjustment is available on the SPEECH output for proper loudspeaker alignment.The 3 QM outputs are controlled separately from the other audio outputs, allowing 3 different program sources and 3 different microphone mixes to be monitored on touchpanels and output to additional audio equipment by way of an appropriate QM receiver or other QuickMedia device(s).Built-in AmplifierA 40-watt amplifier is built into the MPS-300, with three models available offering the choice of 8-ohm stereo, 70V mono, or 100V mono outputs. For large rooms requiring more power, the MPS-300 supports plug-and-play compatibility with Crestron QM-Series 3-channel amplifiers, providing a complete solution for driving a professional loudspeaker system with separate program and speech channels.Front Panel ControlOut of the box, the MPS-300 front panel supports easy pushbutton routing of input sources to each of the outputs, and audio volume adjustment using the volume control knob. Dedicated buttons and indicators are also provided for separate control of system power and projector power. In addition, five preset buttons are included for custom functions such as lowering a projection screen, closing blinds, or selecting a lighting preset.The front panel label strips are easily customized using Crestron Engraver software or standard 3/8" tape labels, allowing for the clear designation of each input, output, and preset button. When selected, these functions will also appear on the LCD display as generic names (Input 1, 2...), or as custom names (DVD, Podium PC, Screen Up, etc.).Easy setup of the MPS-300 is facilitated through the LCD display without necessitating a computer. Together with 4 softkey buttons, 4 menu navigation buttons and the volume knob, the LCD enables configuration of IP network, audio, and other system settings. For security, the front panel controls can be password protected or locked out.2-Series Control SystemIntegrated into the MPS-300 is a Crestron 2-Series Ethernet control system complete with e-Control Web server and a host of RS-232, IR, digital input and relay control ports for integration with third-party equipment. Anything from a basic AV presentation room with a single projector, screen, and keypad controller, to a fully custom touchpanel based system with multiple controlled sources and display devices, can be programmed easily using Crestron SystemBuilder software. And, the MPS-300 works with Crestron RoomView Help Desk software, the industry's most comprehensive facility-wide asset management solution.Room Control OptionsWithout requiring any programming, the MPS-300 can be controlled simply using a Crestron ADAP LCD Controller or a selection of keypads. With custom programming, our complete line of Isys™ touchpanels and MediaManager FlipTops is supported. Equipped with an optional CNXRMIRD IR receiver, the MPS-300 allows any Crestron IR wireless touchpanel or handheld remote to be used for a low-cost wireless control solution. Or, adding an RF wireless gateway or Wi-Fi access point enables use of a wide range of 1-way and 2-way RF wireless handheld remotes and touch-panels.Key FeaturesSystem switcher, audio processor, and control systemOut-of-the-box switching and audio control2 video/HDTV and 3 RGB/computer inputs3 QuickMedia inputs with delay skew compensationBuilt-in input signal sensing | auto-switching capableDiscrete composite, S-Video, component, and RGB outputsNEW! RGB Pass-thru mode for easy integration with DigitalMedia3 QuickMedia and 1 Crestron Home CAT5 AV outputs5 balanced stereo audio inputs2 gated mic inputs with compressor & limiter8-channel mic mixing w/4-band EQ per channelSeparate program, speech, and record outputsGraphic and parametric equalization | 40mS audio delayBuilt-in 40 watt amplifier - stereo, 70V, or 100V models2-Series control engine | e-Control 2 Web server10/100 Ethernet | RoomView and SNMP support2 RS-232, 4 IR, 4 digital in, & 4 relay control portsFront panel setup and control | Backlit LCD displayKeypad, touchpanel, and wireless control optionsInternal power supply | 2-space rack-mountablePROSOUND SERVICE INC.

Price: 3200 USD

Location: Braintree, Massachusetts

End Time: 2024-12-03T18:41:03.000Z

Shipping Cost: N/A USD