Crestron HD-TX-101-C-E & HD-RX-101-C-E Kit

Description: *** NEW-IN-BOX *** SOLD AS A KIT (Transmitter & Receiver kit) The HD-TX-101-C-E is a DM Lite® surface-mountable transmitter designed to pair with a DM Lite or DMPS Lite™ receiver to form a signal extender for HDMI® signals. The DM Lite family of products offers a versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or higher) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K.1For applications requiring a wall plate version, refer to the HD-TX-101-C-1G-E-B-T or HD-TX-101-C-1G-E-W-T product page.For applications that require IR or RS-232 signal extension, refer to the HD-TXC-101-C-E product page.The USB power port supplies power only (500 mA maximum) and is suitable for general use to power USB powered devices. No USB data is passed through this connection. It cannot be used to extend USB data, video, or audio signals.The HD-TX-101-C-E is designed to mount onto a flat surface beneath a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. When powered using the provided wall mount power pack, the HD-TX-101-C-E also supplies power to the connected receiver over the link cable. Alternately, a power pack can be connected to the receiver, which in turn supplies power to the HD-TX-101-C-E over the link cable.2NOTE: This product is not addressable from a control system and offers no programmable functionality. AV and CEC signals are simply passed through between a single transmitter and receiver pair. The RJ-45 link port on this product is exclusively intended for linking with a single DM Lite or DMPS Lite receiver. It should not be used to connect to any other equipment or network. DM Lite technology is not compatible with PoE, PoDM, DigitalMedia 8G+®, or HDBaseT® technology. Key FeaturesPairs with a DM Lite® or DMPS Lite™ receiverEnables extension of HDMI® video and audio signalsLinks to the receiver via a single CAT5e (or higher) twisted pair cableSupports 4K and UHD at up to 130 ft (40 m)Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4Handles 3D video and Deep ColorSupports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audioCompatible with HDMI, DVI, and Dual-Mode DisplayPort™ sourcesUSB power port supplies power to USB powered devicesHDCP 2.2 compliantPasses CEC and EDID signalsLow-profile surface mount designUniversal 100-240V power pack includedThe HD-RX-101-C-E is a surface-mountable DM Lite receiver designed to pair with a DM Lite transmitter to form a point-to-point signal extender for HDMI® signals. The DM Lite family of products offers a very simple and versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K.[1]For applications requiring a wall plate version, refer to the HD-RX-101-C-1G-E-B-T.For applications that require IR or RS-232 signal extension, refer to the HD-RXC-101-C-E.The HD-RX-101-C-E is designed to mount on a wall behind a flat-panel display, on the ceiling above a projector, or on any other flat surface. It can also be attached to a single rack rail in the back of an equipment cabinet. When powered using the provided wall mount power pack, the HD-RX-101-C-E also supplies power to the connected transmitter over the link cable. Alternately, a power pack may be connected to the transmitter, which in turn supplies power to the HD-RX-101-C-E over the link cable.[2]Important: This product is not addressable from a control system and offers no programmable functionality. AV and CEC signals are simply passed through between a single transmitter and receiver pair. The RJ45 link port on this product is exclusively intended for linking with a single DM Lite transmitter. It should not be used to connect to any other equipment or network. DM Lite is not compatible with PoE, PoDM, DigitalMedia 8G+® (DM 8G+®), or HDBaseT®. Key FeaturesPairs with a DM Lite transmitter to provide a simple point-to-point signal extenderEnables extension of HDMI® video and audio signalsLinks to the transmitter via a single CAT5e (or better) twisted pair cable [1]Supports 4K and UHD at up to 130 ft (40 m)Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4Handles 3D video and Deep ColorSupports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audioCompatible with HDMI and DVI display devices[3]HDCP 2.2 compliantPasses CEC and EDID signalsLow-profile surface mount designUniversal 100-240V power pack included[2]

Price: 150 USD

Location: Broomall, Pennsylvania

End Time: 2025-01-16T19:55:48.000Z

Shipping Cost: 16 USD