Createx Candy 20 Colors 120ml Various Shades (GP1L=220.83€)

Description: candy₂O is a Concentrate without binders and has to come with me at least 30% vol. 4030 mix additives | Balancing Clear can be mixedcandy₂O is an intense concentrate. For strong color saturation, 4 – 6 medium-moist layers are recommended. Allow each coat to air dry before applying another. For processing at “normal” humidity (approx. 40 – 60%) and a room temperature of approximately 20°C, a drying time between coats of approx. 10 minutes recommended. When processing under damp or colder conditions, the tracking times must be adjusted accordingly. candy₂O can be processed with a variety of spray guns and airbrushes. The following specifications should be taken as a starting point. In order to achieve the goal - a spray pattern with fine atomization - the settings of the devices (airbrush, paint gun, compressor) must of course be adjusted. When using a paint gun, mixing candy₂O 1:1 with 4030 Balancing Clear allows the best properties to achieve an even application of paint without a marbling effect.Spray gun: 1.0 – 1.5 mm nozzle size, 1.8 – 2.0 barMini paint gun: 0.8 – 1.0 mm nozzle size, 1.8 – 2.0 barAirbrush: 0.18 – 0.5 mm nozzle size, generally mixed at 25 – 50% 4030 Balancing Clear. With as needed 4012 Dilute High Performance Reducer.Wear that 4040 Apply Bleed Checker over candy₂O to prevent bleeding into the paint layer above. After the 4040 has dried thoroughly (approx. 30 - 60 minutes), further layers of color, including another layer of candy₂O color, can be applied directly and without sanding.candy₂O above Quicksilver Chrome for a colorful anodized look. (Picture 2 )candy₂O mixed with Quicksilver Chrome for a matt, rough look. (Picture 3)candy₂O is an intense concentrate. For strong color saturation, 4 – 6 medium-moist layers are recommended. Allow each coat to air dry before applying another. For processing at “normal” humidity (approx. 40 – 60%) and a room temperature of approximately 20°C, a drying time between coats of approx. 10 minutes recommended. When processing under damp or colder conditions, the tracking times must be adjusted accordingly. candy₂O can be processed with a variety of spray guns and airbrushes. The following specifications should be taken as a starting point. In order to achieve the goal - a spray pattern with fine atomization - the settings of the devices (airbrush, paint gun, compressor) must of course be adjusted. When using a paint gun, mixing candy₂O 1:1 with 4030 Balancing Clear allows the b

Price: 24.98 USD

Location: Recklinghausen

End Time: 2024-12-30T20:25:36.000Z

Shipping Cost: 10.01 USD