Cord Cover Wall, 142in One-Cord Channel Cord Hider Wall, Mini Assorted Colors

Description: One-Cord Channel Mini Cord Hider: A good choice when you only have one cord about 0.23" (5.8 mm) in diameter to hide. Mini cord cover wall contains 10 channels, each cable hider is 14.2" L x 0.48" W x 0.3" H. Ideally suited for covering one cable such as lamp cable, monitor cable, speaker cable, Cat-5 or Cat-6 Ethernet cable Total Length 142" Wire Hider Covers for Cords on Wall: Cable hider contains 10 channels and 10 pre-cut adhesive foam tapes. The attached tape has been upgraded to higher quality and stronger adhesion. You can follow the instructions for flexibility in securing cable cover and one cord where needed, rather than damaging your wall with screws (not suitable for textured walls) Finished Installation with Connector-Free Design in Minutes: For easy installation, the Delamu cord covers for wires on wall have no connectors. Even without experience, installation is a breeze. Just peel and stick the double-sided tape to the back of the channel, press it to the wall, put one cord in, and close the cover Hide The Unsightly Cable: This paintable and cuttable wall cord cable hider has an extremely slender appearance and a round arc angle profile that subtly matches the wall. Without messy cords, there is more room in your home and office for you to move around Household Security First: Exposed and unsightly cords may trip up your family. Babies or pets chewing and playing with cables are more likely to cause danger. Install Delamu cord cable management kit to organize unsightly cables and prevent unpredictable accidents Passing the UL94 V-0 Rating Test: A plastics flammability standard released by Underwriters Laboratories of the United States, UL94 V-0 Rating is defined as Burning stops within 10 seconds on a vertical part allowing for drops of plastic that are not inflames, which means its safer than ordinary materials because of the higher flame retardancy and brings greater security to your daily use Warm Reminder: CC05 One-Cord Hider is design for a MINI SINGLE Standard-size Cord while maintaining as low of a profile as possible. If you want to hide multiple cables (or larger one cables), you may get larger cord cover raceway kits from Delamus other cable hiders; 10Pcs x14.2in cord hiders set (not a 142in long raceway) Product Description L14.2in W0.48in H0.30in ，total 142 in MINI One-Cord Cord Hider CC05 Mini Premium Cord Cover Wall: This is a good choice when you only have 1 cable about 0.23 inches (5.8 mm) in diameter to organize and hide Concealable Common Cords: Speaker/Lamp/Phone/Fax Cables, Ethernet Cords, home and office wires, etc Passing the UL94 V-0 Rating Test A plastics flammability standard released by Underwriters Laboratories of the United States, which means its safer than ordinary materials because of the higher flame retardancy and brings greater security to daily use Discover Genuine Customer Reviews with Real-life Photos - Hear from Our Buyers Perfectly Fit and Concealed the Cords! This cable hider is easy to instal, paintable, and concealed cords Excellent Cord Cover Kit! This cord hider cuts down on cord clutter... And since we prefer to hang everything rather than have anything on the floor unnecessarily (makes it easier to run a robot vacuum everyday too), this cable raceway works perfectly for anything corded. I love that the optional sticky back isn’t pre-attached because I hang these with tiny nails while holding them upright against a level. Comes out straight every time. Easy peasy. Highly recommend! Perfectly Useful Wire Covers for Cords! Its easy to install and just looks so much neater when its done Blends in So Well & Not Even Noticeable! Very Easy to put up and make level. I cleaned the wall where I was going to place it with rubbing and used a level to make sure it was even. The beige color nearly matches perfect with my wall too! I am so very pleased with this cable management kit Excellent One-cord Cable Hider and Easy to Use! This is an excellent product for ANYONE! Installation is super easy and extremely fast! This cord hider comes with the adhesive backing and that’s so perfect and convenient! And it’s not super strong because I was able to move it and it didn’t ruin my paint. I’m don’t have ANY tools and I was able to cut cable raceway with scissors. It’s only made for one cord, which is EXACTLY what I was looking for. Don’t hesitate, this cord covers for wires on wall is fabulous! Blend Well & Super Easy & Excellent Adhesion! I had planned to do in wall cable management for some plug in pendant lights in my guest room, but then found out the wall in question was a fire wall. I ended up using these cable cover and painting to match. I am actually much happier with the final look than I thought I would be. Plus, these cord hider wall were super easy to stick on and hold well Invisible & Aesthetic This one-cord cable hider wall provides the most suitable cable raceway for a home or office that only needs to hide a wire and they are not visible Paintable & Cuttable The paintable and cuttable wire covers for cords has an extremely slender appearance and a round arc angle profile that subtly matches the wall Paintable to Match Your Wall Wire hider is paintable, you can paint any color to match your wall. With a coat of latex-based paint, they’ll just disappear into the background 10 Pre-cut Adhesive Foam Tapes The cable cover contains 10 channels and 10 pre-cut adhesive foam tapes. The attached tape has been upgraded to higher quality and stronger adhesion Delamu One-Cord Cable Management kit Connector-less Design Cover Cover CC05 For easy installation, this Delamu Cord Hiders have no connectors. Just peel and stick the double-sided tape to the back of the channel, press it to the wall, put one cord in, and close the cover. One-Cord Channel Cable Cover CC03-9PACK（142in） Delamu, your wire expert, designed this one cord Wall Cord Concealer to provide the most suitable Cord Hider for a home or office that only needs to hide a single wire. One-Cord Channel Cord Hider CC03-6PACK(94.2in) This is the optimum choice when you have one cable to hide. Designed to enclose a low-voltage cable such as speaker cable, lamp cord. Without messy cords, there is more room for you to move around. One-Cable Channel Cable Hider CC03-15PACK（254in） Pay the same but get more raceways and elbows. In this set, you’ll get 15x Cable Hider Channels(16.9in Each), 14x couplings, 6x flat elbows, 2x inside elbows, 2x outside elbows, and 2x tapes. DELAMU 314in Wire Hider CC03-20PACK Sufficient Accessories for Use；18 couplings, 8 flat elbows,2 inside elbows, 2 outside elbows,2 mounting tapes Get a brand new living room with a small and easy change with Delamu Premium Wire Cover. One-Cord Channel Cord Cover CC03-9P Grey（142in） In addition to its function of concealing cables, this grey single Cable Concealer, Wall Cord Hider Improve the look of your home. Its slim and modern design complements your any decor and furniture. How many cables will fit? The Delamu Cable Raceway CC05 can hold up to a single cable about 0.23 inches (5.8 mm) in diameter. Reference: A regular pencil about 0.23 inches (5.8 mm) in diameter. What is the size? The wall cord hider kit is made up of 10 raceways. The size of the single raceway is L14.2" x W0.48" x H0.30" , for a total length of about 142 inches. (Please note that it is Not 142 inches long for a single channel). Does the tape stick? The tape is very sticky. Youd better plan the route before mounting the raceway to prevent re-installation and wall damage. However, some customers feedback that tape is not sticky, we recommend you wipe the dust on the wall before installation. How to remove from the wall? Our tape is very sticky. If you have to remove the tape, please peel it off slowly (or use a knife to gently assist in removing the tape). Can I use on textured walls? This wire hider covers for cords can be used on smooth walls, but not on textured walls.

Price: 13.55 USD

Location: Denver, Colorado

End Time: 2024-10-23T18:25:27.000Z

Shipping Cost: 0 USD