Convoy S2+ Titanium EDC Flashlight 519A R9080 5000K LED 1240 Lumens

Description: Convoy S2+ TITANIUM EDC LED Flashlight, 1240 Lumens, Nichia 519A R9080 90 CRI 5000K, 12 Mode Groups With Up To 8 Modes Per GroupDescriptionThe Convoy S2+Titanium is a high quality, compact, versatile, and durable EDC and general-purpose LED flashlight. The Titanium alloy body gives the S2+ Titanium a classy and high tech appearance. It is available in a bright finish or a stonewash finish.The S2+ Titanium with the 519A R9080 90 CRI 5000K LED and an orange peel reflector has a floody beam that provides lots of short range (up to 200 meters) illumination.With 12 programmable Mode Groups and up to 8 modes per group, plus stepped or stepless ramping modes, plus Strobe and Tactical modes, this is the perfect flashlight for all your flashlight needs. The S2+ is great for your EDC kit, car glove box, your workshop, or around the house. It works great as part of a survival kit, and for all outdoor uses. Features· Floody, High CRI Nichia 519A LED with up to 1240 lumens· 12 Mode Groups· Up To 8 Modes per Mode Group (Depending on Selected Mode Group)· Stepped or Stepless Ramping· Bright or Stonewash Finish· “Clicky” Mechanical Tail Switch· Last Mode Memory for All Modes· Reverse polarity protection· Temperature Control Protection· Low Voltage Protection· Voltage Check Mode· Tail StandSpecifications · Nichia 519A R9080 90 CRI LED with 5000K CCT· Orange peel reflector for lots of floody illumination· Throw of up to 200 meters· Anti-Reflective Glass Lens· Titanium alloy body· IPX4 Waterproof Rating· Rechargeable Battery· 5 Amp Linear Driver Output· Length: 4.63 inches· Head Diameter: .95 inches· Body Diameter: .95 inches· Weight: 4 ounces with batteryPackage Contents · S2+ Titanium Flashlight· · 1 Bay Battery Charger · Battery Convoy S2+ 12 Mode Group Operating Instructions 1. To Turn On: Full click the tail switch. The flashlight turns on at the last brightness level used. This includes all normal and special modes including Strobe, Biking and Battery Check. So if you want to have your M21B turn on in Strobe mode, turn it off when in Strobe mode. 2. To Turn Off: Full click the tail switch. 3. To Advance Through Modes: Half click the switch until you reach the desired mode. The M21B switch only works in one direction. 4. Default Mode Group: (Group 1) modes are: 0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check) 5. Physical Flashlight Lockout: Untwist the flashlight base to break battery circuit. Mode Group Configuration 1. To enter Mode Group Selection/programming, tap the switch about 20+ times until there is no light coming from the flashlight. Release the switch and wait till you see the first blink + flashing. Now you have 2 options:A. Tap the switch to enter Mode Group Selection and the light will blink as described in c. below. B. Full click the switch to the turn the light off and verify which Mode Group you want, then turn the light back on to enter Mode Group Selection. a. Tap/Half Click the switch until it stops advancing through the modes (no light is emitted) to enter mode group configuration mode. b. Tap/Half-click again after a single flash followed by rapid strobing to enable mode group selection. c. The light will flash to indicate which Mode Group you are in. Example: 1 flash = Mode Group 1. 2 flashes = Mode Group 2. 10 flashes = Mode Group 10. d. After the light reaches the desired mode group and the flashing for that mode has ended, switch the light off and then back on. You should be in your desired mode group. 2. Mode Group Description (12 groups): A. Mode Group 1: 1 Flash, then click to select. (0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check)B. Mode Group 2: 2 Flashes, then click to select. (0.1%, 1%, 10%, 35%, 100%)C. Mode Group 3: 3 Flashes, then click to select. (100%, 35%, 10%, 1%, 0.1%)D. Mode Group 4: 4 Flashes, then click to select. (1%, 20%, 100%, strobe, biking, battery-check, SOS)E. Mode Group 5: 5 Flashes, then click to select. (1%, 20%, 100%)F. Mode Group 6: 6 Flashes, then click to select (100%, 20%, 1%)G. Mode Group 7: 7 Flashes, then click to select (0.1%, 1%, 10%, 50%, strobe, biking, battery-check, SOS)H. Mode Group 8: 8 Flashes, then click to select (0.1%, 1%, 10%, 50%)I. Mode Group 9: 9 Flashes, then click to select: (50%, 10%, 1%, 0.1%)J. Mode Group 10: 10 Flashes, then click to select (1%, 10%, 35%, 100%)K. Mode Group 11: 11 Flashes, then click to select (100%, 20%, strobe)L. Mode Group 12: 12 Flashes, then click to select (100% only) 3. To activate or deactivate memory mode, do the following: a. Switch the light on. b. Tap/half-click the switch at least 20 times to enter mode group configuration mode. c. Wait until the light flashes 2 times. d. Click the switch. e. Follow the same steps to change back.

Price: 39.79 USD

Location: Folsom, Louisiana

End Time: 2025-01-20T17:12:49.000Z

Shipping Cost: 2.99 USD

Product Images

Convoy S2+ Titanium EDC Flashlight 519A R9080 5000K LED 1240 Lumens

Item Specifics

All returns accepted: ReturnsNotAccepted

Power Source: Battery

MPN: S2+ Titanium

Item Length: 4.5 Inches

Color Temperature (Kelvins): 5000K - Neutral White

Personalize: No

Lumens: Up To 1240 Lumens

Number of Batteries: 1

Voltage: 2.7V - 4.2V

Item Height: N/A

Body Diameter: .825 Inches

Features: Handheld, Rechargeable, With Wrist Lanyard, XHP 70.3 HI 9050 LED, 90 CRI, 5000K, Up To 3000 Lumens, TIR Anti-Reflective Lens, Ergonomic Electronic Switch, Simple User Interface, Stepped Ramping with 7 Modes, Smooth Ramping

Number of LEDs: 1 Nichia 519A 9080

Unit Quantity: each

Item Width: .825 Inches

Lighting Technology: Nichia 519A R9080 5000K CCT LED

Battery Technology: 18650

Color Rendering Index (CRI): 90

Operating Range: Up To 300 Meters

User Interface: 12 Programmable Mode Groups

Color: Titanium (Polished or Stonewash)

Material: Titanium

California Prop 65 Warning: Yes

Number of Lights: 1