Description: CommScope Andrew Dryline Dehydrator Compressor Rebuild kit for Units with a Thomas branded Compressor as pictured.MT-Overhaul Kit for Andrew Commscope MT-050 Dryline Dehydrators Model No. 2415CEH36, 2415CEH30. Motor No. 600141. This is for units with a Thomas Brand pump only. WILL NOT fit Gast branded models. This is for 2 kits to service each piston. DOES NOT include the compressor or any other parts, fittings, filters, etc.Kit contains 2 kits to service each piston. Parts Replacement and Dehydrator OverhaulCOMMSCOPE dehydrators are designed to give many years of trouble-free service and require very minimal maintenance.The dehydrator contains, as a standard feature, an electronic hour meter that records compressor run hours. To ensure continuous andreliable operation, the dehydrator must be overhauled every 6000 hours of compressor operation. The overhaul kit, listed below, containsall of the necessary parts to perform this overhaul. The dehydrator overhaul kit includes parts to overhaul the compressor and criticalcomponents in the dehydrator that often become worn over time. ToolsThe following tools are used in the maintenance and overhaul procedures.• Adjustable open-end wrench• Allen wrench 5/32• #2 Phillips screwdriver• Small flat-blade screw-driver Unit Shutdown and RemovalIn order to perform an overhaul, the unit must be turned off, power removed and removed from service. As this is beingdone, the low pressure alarm may active through a reporting alarm system. Personnel monitoring such an alarm should be notified inadvance so that they are aware of the fact that service is being performed. It is also necessary to disconnect the dehydrator dry air outputfrom the waveguide system during the overhaul. Remove the compressor for overhaulTo remove the compressor, open the cover panel of the unit.1. Disconnect the compressor wiring (6-pin connector) from control board.2. Disconnect the tubing from the output of the compressor. The tubing and hose clamp can be discarded as replacements areprovided in the compressor overhaul kit.3. Remove the four compressor screws from the bottom and front of the dehydrator. Remove the compressor from the chassis.Remove the brackets that cover the compressor head. Service RestorationRECOMMENDATION:If the dehydrator overhaul process has taken more than a few hours, it is recommended that the unit be run for one hour without beingconnected to any closed air volume in order to purge the membrane dryer and tank of any accumulated moisture. If the transmission lineshave been exposed to ambient air and/or have not retained their system pressure, it is also recommended that the lines be purged.
Price: 689.99 USD
Location: McKinney, Texas
End Time: 2025-01-13T21:45:13.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Aftermarket
Type: Rocking Piston Air Compressor
Model: AE01K-A0870-001 MT300 MT050C PMT200A
MPN: MT050 MT050B MT300 2415
Application: Industrial
