Description: Arizona Custom GripsColt SAA2nd Generation~ Exclusive ~ MAGNA-TUSK™Aged Scroll GRIPSMilled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.~~~~~~~two-PIECE (with SCREWHOLE) STYLEOne-Piece vs. Two-Piece Grips: Many people prefer the clean lines of a grip without a screwhole (One-Piece), while others prefer the look and convenience of a Two-Piece grip (with a screw), which is easier to remove for cleaning or maintenance. Both styles were originally made by Colt in the 1800’s, and both are historically correct. Whichever style you choose really depends on the look you are after. We manufacture both styles.Note: ANY of our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and work on either style of grip frame. THIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.Note: if your revolver is currently set up for One-Piece grips (i.e., no grip pin), we will include, free of charge upon request, a conversion kit which allows these two-piece grips to mount onto a one-piece style grip frame without any modification to your frame. Our conversion kit replaces the need for a grip pin and is actually a stronger design, and locks the grips up tight against the frame, allowing no movement. This gives you the advantage of the ease of maintenance of two-piece grips, while preserving the integrity of your revolver in original factory condition. If your revolver does NOT have a grip pin, please send us an immediate email after the purchase requesting the conversion kit. If your revolver already uses two-piece grips and has a grip pin, you do not need the kit and these grips will work, AS-IS.Grip screw, and full illustrated instructions are included with each set of grips. Whichever style you choose, you are guaranteed to get the best quality grips on the market, made to last a lifetime, for your shooting pleasure and enjoyment.10292000 ~~~~~~~WHAT THESE WILL FIT (Please read this through in its entirety): Colt SAA 2nd Gen.Brand New, unused grips for the 2nd Generation Colt Single Action Army revolvers. IMPORTANT!! – In order to get the correct fit for your Colt SAA 2nd Gen. revolver, please add a note to your order stating the date your revolver was manufactured. Colt used several grip frame variations during this time. If you do not know the date of manufacture, please send your serial number and we can look it up. If we do not hear back from you, we will send the most common type in order to get these out on time.Please note that these grips will NOT properly fit the 1st or 3rd Generation Colt SAA models. Also, these will NOT fit any revolvers of any different maker, including the Uberti, Pietta, or any other Italian or non-Italian clones. If you have one of these, please see our store categories for the proper grips, or drop us an email and we will be happy to help. 08152300 Arizona Custom Grips About our exclusive Magna-Tusk™ “Hi-Grade” Ivory Grips: Our Ivory grips, an exclusive of Arizona Custom Grips, are made out of a premium high-grade, ultra-high density ivory material (Magna-Tusk™), designed from the ground up as a premium grip material to greatly improve on the inherent fragility and weakness of the cheaper Bonded Ivory used on just about all factory and regular aftermarket ivory grips today. Standard Bonded Ivory is brittle, and tends to weaken and develop stress fractures over time with repeated use, firing, and handling. Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative Ivory grip material available today, while still retaining the pristine look of real ivory. These grips are not cast or made out of an inferior, lightweight material, but are heavy and dense, carefully milled out of a solid block, one at a time. Magna-Tusk is completely rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, will not melt like Urethane or plastic, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is produced with outstanding aesthetic properties and mechanical performance. When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which most experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. About Our Aging Process: We go to great efforts to ensure that our Aged Ivory not only looks similar to real aged ivory, but in fact looks identical to the real thing. Our Magna-Tusk blanks will produce an aged Ivory grip unlike any other material made today. Through our slow aging process, these grips become beautifully mottled, variegated, and weathered just like old, antique Ivory, and incorporate other authentic details found on original old Ivory as seen on many of the revolvers which belonged to gunfighters and lawmen of the Old West. As with real aged Ivory, no two are exactly the same. Our process produces an authentic appearance and genuine patina which extends deep into the surface. Not only does this give it the appearance of authenticity and depth, but this surface will not chip, crack, or peel like a superficially applied coating. With Magna-Tusk aged grips, most experts cannot tell them apart from a decades-old or even a centuries-old original. While the quality difference is somewhat noticeable in the photos, the difference is even more apparent when seen and handled in person. Many of our repeat sales are made by the very customers we sell to, who take their grips to the range or club, where our grips are immediately seen and noticed by others. We are also capable of producing them with a “clean” aged look if required (i.e., without the mottling, etc.), which is a simpler process, although most would agree that they do not look quite as authentic as our regular aged grips. If you are interested in ordering grips for a Brace of pistols, please order both sets together, so we can ensure a good matchup. Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time. The more these grips are handled and used, the better they look! 040720 Please note that the photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us – full money back, less shipping, if not completely satisfied!!
Price: 89.95 USD
Location: Mesa, Arizona
End Time: 2024-01-15T19:36:52.000Z
Shipping Cost: 5.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Arizona Custom Grips
For Gun Make: Colt SAA 2nd Generation
MPN: Does Not Apply
For Gun Type: Colt SAA 2nd Generation
Country/Region of Manufacture: United States
Material/Finish: Magna-Tusk, Aged Scroll
Available Variations
Color: Silver Liberty Eagle
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Gold Liberty Eagle
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Antique Nickel Steer Skull
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Red Steer Skull
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: No Medallion
Price: 89.95 USD
Available Quantity: 100
Quantity Sold: 0
Color: Silver Colt
Price: 109.95 USD
Available Quantity: 100
Quantity Sold: 0
Color: Gold Colt
Price: 109.95 USD
Available Quantity: 100
Quantity Sold: 0
