Clubsport Pedals V3 Sim Racing Pedals w/ 90KG Load Cell for FANATEC PC PS Ready

Description: Description Original Clubsport Pedals V3 Sim Racing Pedals w/ 90KG Adjustable Load Cell for FANATEC PC PS Ready Attention: The pedals cannot be connected to the wheel base for Fanatec and a computer USB at the same time. Under no circumstances can two wires be connected at the same time. Users shall be responsible for the failure caused by violations. Before use, please be sure to contact customer service to inquire about the pedal wiring method. Description: Advanced technology Nothing will make you faster than a set of good pedals. We are using the latest and most advanced technology to give you that competitive edge. 90 kg adjustable load cell The custom made load cell is extremely durable and much more precise than the previous generation. You can apply a realistic and strong pressure, and precisely control the brake with muscle tension, just like in a real car. New pedal plates The new D-shape pedal plates and the new pedal extensions allow pedal plate angle adjustment and the angle of the whole pedal arm. Proven design The third generation of the ClubSport pedals is still using the simple but proven design of its legendary predecessors. Maximum adjustability There are countless ways to adjust these pedals ergonomically according to your racing style and preferences. Contact-less Hall sensors The electronics have been completely revised and the magnetic Hall sensors of the gas and clutch feature 4x the resolution of the previous generation V2 pedals. Each axis can be calibrated through the wheel or using the driver. Adjustable brake stiffness The completely new design of the brake pedal allows stiffness and travel adjustment without using any tools. Features: - High resolution pedals with magnetic and contact-less sensors on gas and clutch for a long life and maximum performance - Pressure sensitive brake with custom made 90 kg load cell sensor - Adjustable brake stiffness and travel without tools - 12bit resolution (4096 values) on all axis - Alternative D-shape race plates in curved design. Ideal for standing pedals - Pedal extension to adjust the angle of the pedal plate and to change the angle of the whole pedal arm - Brake sensitivity can be adjusted through the tuning menu of the wheel and during the race - Vibration motor on throttle pedal indicates rear wheel spin and over-steer (control by games is possible via Wheel SDK for Fanatec) - Vibration motor on brake pedal to simulate ABS and indicate locking tires (controlled by original wheels for Fanatec: Compatible to all games. Dynamic control by games is possible via Wheel SDK for Fanatec) - Design of the gas pedal allows quick exchange of the springs. Two springs with different strength are included - Optional damper kit for gas and brake. The hydraulic dampening resistance can easily be adjusted with a knob - Full multi platform compatibility, depending solely on the platform compatibilities of the connected Wheel Base/Racing Wheel - Full metal construction of CNC-machined aluminum - Ultimate adjustability: Position of pedal plates in all directions, angle, spring strength at throttle, brake sensitivity and brake travel - Compatible to the colour kits to allow perfect visual customization Compatibility: 1. Platforms: 1.1. PC: * If you connect it to an Wheel Base / Racing Wheel for Fanatec, it will be compatible to all racing games. For that case, please check the compatibility details on the product page of the connected product. * It will work with any racing wheel, also of any other brand (for Logitech, Thrustmaster, etc.), if the pedals are connected to PC via USB and if the game supports a second controller. E.g. these PC games support a second USB controller: iRacing Assetto Corsa Project Cars GTR 2 Race 07 rFactor Live for Speed ...and many others 1.2. Consoles: This pedal set can be used on gaming consoles, if connected through an original Wheel Base / Racing Wheel for Fanatec. Please check the information on the product page of the product for Fanatec through which they will be connected to the console. It will not work on consoles using the direct USB Connection or a ClubSport USB Adapter. 2. Peripherals: - Compatible to any original Wheel Base for Fanatec or original Racing Wheel for Fanatec with RJ12 Pedals connector. To connect original Wheels (for Fanatec) with PS/2 Pedal Socket, you need the additional PS/2 to RJ12 cable. - Compatible to ClubSport Pedals V3 Brake Performance Kit - Compatible to ClubSport Pedals V3 Damper Kit (throttle and brake pedal) - Dedicated plug for the ClubSport Handbrake - The pedals are not compatible to the ClubSport USB Adapter. Please use the included USB connector (PC only). Special Notes: - Please note that the vibration function on gas and brake is not supported by all games. On PC it can be implemented with plug into our driver / third party software if the games sends the telemetry data. - Max resolution depending on the connection: * through PWT / PWTS / CSR / CSR Elite wheel: 8 bit (256 values) on all axes * through CSW B V1 / CSW B V2 / CS WB V2.5 / CSL E WB / CSL E WB+ / CSL E WB V1.1 / CSL E RW for PS4: 12 bit (4096 values) / P WB DD1 & DD2 on all axes * USB direct connection (PC): 12 bit (4096 values) on all axes Technical Specifications: - Platform: For PC, PS4 Ready & XBox One Ready - Adjustable pedal angle: Yes - Color kit: Optional - Brake performance kit: Optional - Max bits of resolution: 12 (4096) on all axes - USB Connectivity: Direct - Adjustable brake stiffness and travel: Yes - Adjustable spring strength: Throttle - Sensors: Contact-less magnetic, load cell - Pedal pads: Anodized aluminium, D-shaped - Vertically adjustable: Yes - Horizontally adjustable: Yes - Damper: Optional - Throttle vibration: Yes - ABS brake vibration: Yes - Degressive clutch: Yes - Clutch pedal: Yes - Adjustable brake sensitivity: Yes - Load cell brake: Yes - Main material: CNC machined Aluminium - Hard-mount: Bottom Package Included: - 1 x Set of ClubSport Pedals V3 Packaging Details: - G.W.: 10.5kgPayment Terms 1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc. 2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.Shipping Terms 1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email. 2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.Return Terms If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.Custom Duties & Taxes 1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers. 2. Please check with your country's customs office and inform us what/how much should declare before shipping.Feedback 1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap. 2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.On Aug 15, 2024 at 21:02:26 PDT, seller added the following information:

Price: 868.3 USD

Location: Shenzhen

End Time: 2024-09-16T02:53:47.000Z

Shipping Cost: 3 USD