Description: Clover FLEX GEN3 new BatteryP/N AHA22121005NOT for the older GEN1/2 Replacing defective BATTERY (not charging and/or bloated/distorted bottom of case)NOTE that I also have a listing for REPAIR (Ebay listing # 115591416927 with battery installed by me for addl $35) which is not easy to do and may cause permanent damage if done incorrectly!NOTE that you will need a 1/2" chisle AND a Torx T4 screwdriver to do the job yourself . If you didnt open the case yet, please advise and i will ship a T4 tool with the battery. If you want it let me know by ebay msg after the purchase. It maybe slightly easier to pry open the case if the bad battery bloated up. but if simply went bad (due to age) the case will be shut tight and you will have to 1st unscrew the front 2 screws (shown w arrow in attached pic) crack open the black bottom cover with the chisel or a used credit card and "walk round" the crack. once he black cover is poped out you can remove the old battery (held also by 2 screws). after bat is replaced, put screws in bat holes and tighten.then alight the black cover over the machine back and snap in. then insert the 2 last screws in front. voilla ! so much easier than on GEN1.see attached pictures of case cracked open a bit , after removing the Torx screws, or by bloated batteryI ship by 1st Class Mail with delivery confirmation (renamed recently to Ground Advantage)
Price: 111.11 USD
Location: Westlake Village, California
End Time: 2025-01-09T23:46:51.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Clover
MPN: DOES NOT APPLY
