CABLE REMOTE CONTROL VALVE KIT 2 SPOOL 3SECTIONS 40L JOYSTICK John Deere 11 gpm

Description: WARNINGIf you buy more than one product from my store, write to us and I will refund all shipping costs if possible due to the weight and locationNOTE: We issue VAT invoices for countries in the European Union.Only accredited courier companies GLS, Fedex, DPD, UPS are delivered to EU countries. Delivery takes 2 to 4 days.Delivery to USA 2-5 daysWe sell wholesale KIT INTENDED FOR WORKING ON TRACTORS WITH A FIXED CLOSED SYSTEMPRESSURE WHERE A PUMP DELIVERS THE STEERING SYSTEM (ORBITROL) AT THE SAME TIMEAND HYDRAULICS IN THE LOADER E.G. FOR JOHN DEERE TRACTORS NEW 2-spool 3 sections hydraulic control valve 2P40 1 A1 A1 GKZ + ADAPTER Carry Over + PLUG + 2 pieces of RC cable + joystick + diverter switch 12V (24V possible) Joystick Indemar ID-6019Control twice with one hand+Valve 2P40 1 A1 A1 GKZ1-Maximum operating pressure P = 4300 psi (300bar); T = (50 bar); A, B = 4300 psi (300 bar)-Nominal flow rate 11 gpm (40 l / min)- CENTER CLOSED (pump-to-tank flow)-Adjustable pressure relief valve- A, B connections 3/8 "BSPP (British Standard Parallel Pipe, not NPT)- Connection P, T, N 1/2 "BSP SOLENOID VALVE 6/2 FOR THIRD SECTION: Maximum flow up to 50 l / min Standard 12 VDC solenoid valve voltage (if you want to write 24 V to me) Internal thread in the housing: BSP 1/2 " Maximum pressure: 250barTwo-position slide on the spring, ie it returns to the neutral position after the supply has been switched off Current to coil. Functional principle of the solenoid valve: Slide position 1 (the button on the joystick is not pressed) - control of cylinder 1.Slider position 2 (the button on the joystick is pressed) - control of cylinder 2. -All coils areStandard double-acting with spring return in neutral position It is widely used in hydraulic systems in construction, agriculture and industry. The set is adapted to different types of machines such as: agricultural machinery, tractors, Field sprayers, tours, cyclops, HDS loaders, construction machinery, loaders, excavators, sweepers, Industrial machines and other hydraulically controlled devices. Ideal for controlling three sections per revolution, lifting the frame, tilted head and grapple for bale or crocodile. In tractors where the hydraulic pump output does not exceed 40 l / min GENERAL INFORMATION: The main advantages of joystick control: 1. Very comfortable, convenient and precise control. 2. Safety mechanism with which the joystick head can be blocked. 3. Throw the manifold outside of the booth, which will stay clean with no oil leaking. Joystick: Adapted to control two sections in the manifold. Has an additional button and exit Electrical wiring harness that enables the use of an electrovalve that provides additional control, third section e.g. in the TUR loader with a crocodile or a bale grab. Inner parts made of aluminum, housing made of strong plastic. Blocking the possibilities Control via the safety button. NIMCO European production, 2 year guarantee. LEFT: Standard cable length: 2m (we will send it unless the customer specifies otherwise). The possibility of changing the length of the lines to 1 m; 1.5 m; 2.5 m; 3m without changing the price of the set. Thread on the distributor side: cable body M16x1.5, cable tie M6x1.5. Joystick ball with a diameter of 14mm.

Price: 310 USD

Location: Torun

End Time: 2025-01-02T17:04:31.000Z

Shipping Cost: 65 USD