Brandywine Communications Modular Master Clock MMC GPS SAASM 1PPS 10MHz

Description: These are very lightly used Brandywine Modular Master Clocks. Configured with Single Power Supply (Dual Capable). Included are 1U Rack Rails, Power Cable, a copy of User Manual and Configuration Utilities for Windows (available online). Brandywine’s Modular Master Clock System represents the next generation of modular timing systems. Built on the highly successful High Performance Timing System, the Modular Master Clock System is a leap forward in design. Redundant design with multiple signal paths built in for high-availability.5 expansion slots (12 slots in 2U version).Industry-first GPS integrity checking Unique optical crosslink architecture for either Master-Slave hierarchical setups or Master-Master crosschecking and failover Operated by a detachable touch-screen interface, a first for any master clock system. Single or dual redundant configurations in a single 1U chassis Modules are hot-swappable from the front and minimize the need to disconnect cables. At the center of the MMC system are Brandywine’s powerful Master Clock Modules (MCM). The MCM may be synchronized by a variety of reference sources and uses the selected reference to steer an embedded oscillator to provide stable and accurate time and frequency for the MMC. Multiple references can be prioritized with automatic failover. Uniquely, the MCM will also validate the GPS reference based upon the inherent stability of the MCM oscillator, providing hardening against possible GPS spoofing. Available input reference selections include GPS (both C/A code and SAASM receivers are supported), IRIG-B, Have Quick/1PPS and external 10 MHz. In additional an MCM may be synchronized by up to 2 other MMC chassis using a fiber optic crosslink, this provides additional resiliency for the MMC time and frequency references. The MMC supports multiple reference oscillator choices, including Rubidium (2U chassis only), Chip Scale Atomic Clock (CSAC) and Ovenized Oscillator (OCXO) Up to two MCM modules may be installed in the 1U chassis, with automatic failover if the on-line module should fail The output signals for the Modular Master Clock System are generated by up to 5 hot-swappable Output Signal Modules (OSM), and are ideal for custom solutions or future expansion. Available modules include NTP, low-phase-noise frequency, IEEE-1588 PTP, time code modules such as IRIG A, B, G, H, and NASA 36, BCD, PPS, PPM, Have Quick as well as optical crosslink. The MMC status and control is via an Ethernet port using SNMP, or a Brandywine provided application. An optional full color touch screen that allows control of the local chassis, as well as remote chassis that are connected via crosslink may be connected to the front panel via an umbilical cable. User controls for the MMC are protected via password with encrypted storage. Network protocols also fully support privacy and authentication.

Price: 299 USD

Location: Marietta, Georgia

End Time: 2024-12-06T11:55:08.000Z

Shipping Cost: N/A USD