BowHouse RC X-Maxx SVT Motor Mount Risers

Description: New in package BowHouse RC X-Maxx SVT Motor Mount Risers Bowhouse X-Maxx SVT Motor Mount Risers are designed to work with the SVT Big Bore Motor Mount to allow use of taller than stock gear ratios, as well as longer big-bore motors like the Castle 2028 and Hobbywing 56113 motors. Gear ratio guide:Accommodates most Mod 1 gear ratios from 83 to 90 total teeth (spur + pinion)Accommodates most Mod 1.5 gear ratios from 55 to 60 total teeth (spur + pinion)Spur/pinion ratios of 1.6 or higher are recommended with the Hobbywing 5687 motor.Spur/pinion ratios of 1:1 or higher are recommended with the Castle 2028 and Hobbywing 56113 motors. Installation notes:Attach 1 riser under each side of the SVT Big Bore Motor Mount using included M3x20mm screws (2 per risers) and M4x16mm screws (1 per risers) with thread lockUse included M4x30mm screws and M4 washers with thread lock to attach motor mount and risers to chassisSlide motor mount left/right to adjust mesh before tightening screws Includes:(2) Risers(4) M3x20mm flat head screws(2) M4x16mm cap head screws(4) M4x30mm cap head screws(4) M4 washers Vehicle models vary. We DO NOT guarantee this will fit the vehicle specified in this listing!Verify that this item is appropriate for your vehicle. Consult your manual or vehicle manufacturer.Verify vehicle fit-ment before purchase.Returns will only be accepted on items that are returned in new, factory-sealed packaging. Used, damaged (unless damaged when it arrived to you), and opened items will not receive a full refund. Any and all warranty claims will be handled through the manufacturer directly.

Price: 29.99 USD

Location: Binghamton, New York

End Time: 2025-02-05T15:21:20.000Z

Shipping Cost: 4.49 USD