Blue Diamond Envir-o? ET Series Air Pumps

Description: Note: The Blue Diamond ET series aerators are designed for relatively low pressure. Tubing should not exceed 130' and diffusers should only used in water up to 7' deep. Save even more when you buy Blue Diamond air pumps in bulk! Each bulk case has a extra $10 savings per pump compared to buying the pumps individually. Blue Diamond Air Pumps Blue Diamond ET Series Air Pumps are versatile pumps that can be used in aquariums, ponds and certain septic applications. The weatherproof pump has a robust and compact construction, and the main body is constructed of cast aluminum alloy.Green Drive Technology – Energy efficient motors with low power consumptionSuitable for intermittent and continuous duty applicationsSimple, Effective Maintenance – Replacing diaphragm returns pump to full performanceSpecially formulated diaphragm material for extended lifePumps made in in ChinaConnections Most models come with two connection options. The ET30 and ET40 each have a plain horizontal 14.0mm (0.55") O.D. outlet connection fits tight on a 1/2" I.D. tubing or loosly with a 5/8" tubing. A rubber elbow is also included. Each pump also comes with barbed fitting that threads into the threaded interior of outlet to provide a 10.0mm (0.39") O.D. barb which fits well in 3/8" I.D. tubing.The ET60, ET80, ET100 and ET120 each have a plain horizontal 18.0mm (0.71") O.D. outlet connection fits very tightly on 5/8" I.D. tubing or loosly in 3/4" I.D. tubing. A 3/4" rubber elbow is also included. Each pump also comes with barbed fitting that threads into the threaded interior of outlet to provide a 12.0mm (0.47") O.D. barb which fits well in 1/2" I.D. tubing. The ET50 and ET200 each have only a plain horizontal 18.0mm (0.71") O.D. outlet connection fits 3/4" I.D. tubing. A 3/4" rubber elbow is also included. On all models where the "brass" is used to connect to a septic pump alarm, the brass is 4mm or about 1/32nd. 2 Year Warranty This warranty does not include the diaphragm kits, which are a replaceable, wearable part (typically replaced every 12-18 months). Warranties are at the discretion of the manufacturer as to whether the damage is due to misuse or to defect. PGP Tip The most common problem with this and other larger air pumps is premature diaphragm tearing due to excessive back pressure. People don't tend to understand how much air the large sized pumps produce. If an air pump is powering too small of a diffuser or too few outlets, excessive back-pressure can occur. The solution is to add a tee with a ball valve or other "bleeder valve" so that excessive air can be bled off into the atmosphere. Start with the valve completely open and slowly close it until you have the maximum output from your air diffusers without unnecessary back pressure ModelStartup PowerOperating PowerStandard PerformanceConnectionsNoiseWeightDimensions (Inches)ET3030W25W @ 0.14 bar30Lpm (1.06cfm) @ 0.15 bar14mm Slip; 10mm Barb40dB4.0kg8.18L x 5.9W x 7.0HET4055W30W @ 0.14 bar40Lpm (1.41cfm) @ 0.15 bar14mm Slip; 10mm Barb40dB4.3kg8.66L x 6.10W x 7.48HET6085W55W @ 0.14 bar60Lpm (2.12cfm) @ 0.17 bar18mm Slip; 12mm Barb45dB6.0kg7.99L x 6.49W x 6.02HET80105W75W @ 0.14 bar80Lpm (2.83cfm) @ 0.1 bar18mm Slip; 12mm Barb45dB7.0kg8.26L x 7.28W x 6.73HET100125W80W @ 0.14 bar100Lpm (3.53cfm) @ 0.1 bar18mm Slip; 12mm Barb45dB8.5kg9.37L x 7.71W x 6.96HET12090W90W @ 0.14 bar120Lpm (4.24cfm) @ 0.1 bar18mm Slip; 12mm Barb45dB9.5kg10.43L x 8.36W x 7.79HET150150W150W @ 0.14 bar150Lpm (5.3cfm) @ 0.15 bar18mm Slip; 12mm Barb45dB9.0kg10.07L x 7.87W x 8.74HET200220W220W @ 0.14 bar200Lpm (7.06cfm) @ 0.15 bar18mm Slip; 12mm Barb46dB9.0kg10.07L x 7.87W x 8.74H SpecificationsPower CordGrounded 18 Gauge, 5' 3" LongWarranty2 Years

Price: 579 USD

Location: Downingtown, Pennsylvania

End Time: 2024-01-27T19:52:39.000Z

Shipping Cost: 0 USD