Blind Spot Detection System – Lane Change Alert, 24GHz Sensor, DC12V

Description: Blind Spot Detection System – Lane Change Alert, 24GHz Sensor, DC12V This blind zone detecting system is a vehicle assistance device that helps you safely changing the lane during driving & improve driving safety. The LED indicator will alert you when there is a moving object into the vehicle blind area, so that the you can be caution when lane changing to avoid the possibility of traffic accident & improve driving safety. The system can monitor the closing objects in the neighbor lane within a range of 6-12 meters with speed gap over When the moving object enters the blind area, the LED light will be flash to alert the driver. If the steering is turned on, the system works in lane change assistant mode & the LED light will flash rapidly and the buzzer beeps three times to alert the driver being careful to change a lane. With 2pcs 24GHz microwave sensor, probe the rear side of the vehicle for moving objects into the blind area of the detection zone. IMPORTANT: Can install on cars with a plastic bumper only, not work with vehicles with a metal bumper as metal bumper will interference with the radar sensor. This item fits for most DC12v sedan, compact, SUV, MPVs, pickup etc and professional audio installer installation is required. Dear customer, This is car blind area detecting system. With two 24 GHz millimeter-wave radars mounted on the rear bumper of the car, the system can monitor the closing objects in the neighbor lane within a range of 6-12 meters. When the moving object enters the blind area, the LED light will be on to alert the driver. At the same time, when the steering is turned on, the system works in lane change assistant mode. The LED light will flash rapidly and the buzzer beeps three times to alert the driver being careful to change a lane. Important: This system is only auxiliary during driving. Please operate according to the actual traffic conditions. You cannot rely on this product completely in case of accident. The ACC cable must be controlled by the ignition switch of the car, if you connect the ACC wire with the constant 12V wire, the device may consume the car battery. There is an English user manual and wire diagram coming along with this item. We do not provide installation service and sincerely recommend you install it by a professional car alarm/audio installer if possible. Please check if you can find one before purchasing. User manual and wiring diagram are available upon request. Main features: Left blind area detection Right blind area detection Left steering warning Right steering warning Lane-changing reminder High-speed frequency sensors for the left rear and right rear of the vehicle Detection range: 6-12 Meter Buzzer warning indicators for right and left side Warning LED indicators will illuminate to warn you of an moving object

Price: 186.99 USD

Location: Holley, New York

End Time: 2024-11-11T22:35:49.000Z

Shipping Cost: 0 USD