Description: Fermentor Cooling Coil304 Stainless Steel, 25ft long tubeShort Cooling Coil fits up to 7 Gallon FermentorTall Cooling Coil fits 14 to 42 Gallon FermentorEasy to install and sanitize bulkhead fittings1/2" NPT ConnectionsIncludes two 3/8" 90 degree QuickConnector™ fittings!Dimensions: Short = 9.5in (tall) x 9in (diameter) Cooling Coil Assembly, Operation, & Maintenance Congratulations on your purchase, and thank you for selecting the Cooling Coil from Blichmann Engineering™. We are confident that it will provide you years of service and many gallons of outstanding beer. This manual will familiarize you with the assembly, operation, and maintenance of the Cooling Coil.Preparing the Fermentor Lid Mark the hole locations 6.5” apart from each other on center as shown in Figure 1. Ensure there is enough clearance for fittings and mounting hardware. Drill two 3/16” pilot holes. Use a step drill to and enlarge hole to 13/16” (Fig 2). Spray the drill bit with water to cool and lubricate while drilling. Step drills are available through most hardware/home improvement centers or through McMaster.com (part# 8841A24 or 89315A42 for TiN coated). Alternately, a 13/16” knockout punch (McMaster.com part 3449A999) can be used. After drilling remove all burrs. Installation Thoroughly wash the exterior of the coil with Powdered Brewery Wash or Bar Keeper’s Friend before use. Install the Cooling Coil with two adjustable wrenches and DO NOT overtighten. Cooling Coil Owners Manual - V1 ©Blichmann Engineering, LLC 2018 For replacement parts visit blichmannengineering.com/genuine-replacemnet-partsCleaning and Maintenance Drain the liquid from coil and rinse with water. Drain water from coil and let dry. Clean the outside of the coil with Powdered Brewery Wash and a brush. Sanitize before installing into fermentor. Operation The Cooling Coil may be sanitized with StarSan® or other brewing sanitizer. This product is to be used as part of a complete cooling system. A temperature controller, a recirculation pump, and a glycol chiller are preferred for operation. A food safe liquid, such as an FDA grade glycol should be used to pump through the Cooling Coils. This is available through Blichmann Engineering. Please refer to Dowfrost spec sheet for more information. Alternatively an ice water bath may be used instead of a glycol chiller. This coil is pressure capable up to 50 psi and may be used with commercial glycol shilling systems. The cooling coils will work best when fully submerged. If only half of the coil is submerged, the cooling speed will likely be diminished by half.1Fig. 16.5”Fig. 2Optional hole plugs kits are available.
Price: 108.99 USD
Location: Lansing, Michigan
End Time: 2023-12-24T17:47:37.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Final Product: homebrew
Country/Region of Manufacture: United States
Type: homebrew
Brand: Blichmann Engineering
