BK Precision 2831E True RMS Bench Digital Multimeter

Description: BK Precision 2831E True RMS Bench Digital Multimeter The BK Precision 2831E benchtop digital multimeter (also known as a multitester) is a true RMS, auto-ranging meter for measuring current, voltage, resistance, and frequency in electrical testing and manufacturing applications and for teaching electrical engineering principles. The meter comes with a set of detachable test leads. The dual LCD displays two readings at once, such as voltage and resistance. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuits diodes. The meter also measures period. The user can set high and low limits for pass/fail testing. The meter displays the present measurement or the highest or lowest reading in a session, for tracking sudden changes in readings. The meter can also express AC and DC voltage in decibels (dB), the power ratio of decibels to milliwatts (dBm), and percent of the reading relative to a preset reference value. The relative mode stores a reading in memory to use as a zero point for subsequent readings so that multiple readings can be compared. A hold function keeps a reading on the display, even after the meter has been disconnected. The user has a choice of slow, medium, or fast measurement rate; the faster the rate, the less precise the measurement. The USB interface connects the meter to a computer for data transfer and remote operation (cable sold separately). This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The LCD has a 20,000-count resolution, meaning it can display up to 19,999 units (4-1/2 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category I installations up to 1,000V (which covers protected electrical equipment such as small household appliances) and Category II installations up to 300V (which covers large household appliances and devices connected to a fixed power supply, such as refrigerators and air conditioners). Specifications Maximum alternating current (AC) input20 ampMaximum direct current (DC) input20 ampMaximum AC voltage input750 volts (V)Maximum DC voltage input1,000VMaximum resistance detected20 megaohmsMaximum frequency detected1 megahertz (MHz)Period measurement range1 microsecond to 100 millisecondsMaximum sample rate25 readings per secondPower requirement110/220V, + or - 10%; 50/60 Hz, + or - 5%Standards metInternational Electrotechnical Commission (IEC) safety standard 61010:2001, European Union EMC (EN) EN61326-1:2006, EN61326-2-1:2006Weight400 g/14.1 oz.Dimensions198 x 90 x 44 mm/7.8 x 3.6 x 1.7 inches (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Multitesters (also called multimeters) are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multitesters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multitesters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltag Features Digital multimeter measures current, voltage, resistance, and frequencyTrue RMS (root mean square) meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveformDual LCD shows two readings at onceAudible continuity sensor confirms a circuit conducts electricity, and diode test detects proper functioning of a circuits diodesMeets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category I installations up to 1,000V and Category II installations up to 300V Details Fast and Free Shipping You're already purchasing the item. Why pay additional for shipping, especially slow shipping? We get your order shipped out within 1-business day and delivered to your doorstep as quickly as possible. Competitive Pricing With our dynamic pricing model, our prices are always competitive. Our prices are some of the lowest that you will find on the internet. Rest assured that you're getting a good deal when purchasing with us. Support small businesses By shopping at J Cross Goods you are supporting a small business owner who will go the extra distance to ensure you leave this transaction satisfied!

Price: 399.99 USD

Location: Rosharon, Texas

End Time: 2024-11-17T08:40:41.000Z

Shipping Cost: 0 USD