B500K Push Pull Pot DPDT Audio Potentiometer Volume Tone Switch for Guitar Bass

Description: Oletone Push Pull Pot DPDT Switched Guitar Bass Potentiometer Audio Volume Tone Split Shaft Control Switch 18mm with Nuts and Washers Guitar Parts Replacement B500K. Product Description B500K-ohm linear taper potentiometer with Double Pole Double Throw ( DPDT on-on ) push / pull switch. 6mm splined shaft to accept standard push on control knobs. This switched pot is suited to being used in place of the standard volume pot, although it is personal choice whether you use these taper pots for volume or tone, on a single coil equipped guitar to provide tonal switching options. Typical uses include phase reversal, tone capacitor switching, tone bypass etc. 100% brand new, never used, perfect for replacing and upgrading volume controls. 250K VS 500K Generally, 500K-ohm pots are used with humbuckers and 250Ks are used with single-coil pickups. You can use any value you like, but a 250K will give a slightly warmer tone than a 500K pot. The 250K pot bleeds off some of the high frequencies to ground. A 1 Meg-ohm pot bleeds off even less than a 500K pot, so if you want to hear your guitar "wide open" you may want to try one. Feature B500K-ohm control pot Split shaft with coarse knurling fits most control knobs Split shaft diameter: Approx. 6mm(0.24'') Shaft length: Approx. 18mm(0.71'') Full length: Approx. 45mm(1.77'') Base diameter: Approx. 22mm(0.87'') Package Include 1 x B500K push pull control pots 2 x Mounting nuts and washer Note Please allow 1-3mm error due to manual measurement. please make sure you do not mind before you buy. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please when you have problem with the item before leaving feedback, we will try our best to serve you as soon as we receive your message.

Price: 7.99 USD

Location: Liaocheng, Shandong

End Time: 2024-12-17T08:53:50.000Z

Shipping Cost: 0 USD