Automotive 12V & 24V 100-2000 CCA Car Battery Tester Analyzer Temperature Load

Description: Product DescriptionBattery system testers are used for activated style lead-acid storage battery, and checking the battery conditions (temperature, starting up, charging, electrical loading). Precise circuit and strong digital processing unit make it collect a series of complicated data completely and figure out every test data, which is available by 4-wire Kelvin test connection.Besides, it strengthens input protection inside to prevent such situations as polar reversal connection, over-high voltage input, poor contact of the test clamps, and so on.ANCEL BST600 battery tester is designed with convenience and broad functionality in mind. In addition to the printer function, it features a wide capability for the purpose of battery diagnosis and maintenance. It works on 12V and 24V battery systems, including the actual Cold Cranking Amps test, the health status test, and the diagnosis of both starting and charging systems for common faults. It also has an integrated printer capable of printing out test results for improved service. This tool lets you know the condition of the battery system in advance, saves a trip and money to an auto repair shop.ANCEL BST600 12V 24V BATTERY ANALYZER WITH PRINTER Tests 12V & 24V battery, cranking system, and charging system.Test Multiple Battery Types: Regular flooded, AGM flat plate, AGM spiral, Gel and EFB;Supports all battery rating systems - CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.Test result: Status of health (SOH), Status of charge (SOC), Measure CCA value, Battery temperature, Voltage, internal resistance, Ripple Test, load test,Data Review,Print Test Report. Displays test result in merely seconds, more accurate than the low-priced tester.Tests in-vehicle battery and single storage battery.Quick starter analysis without disabling the ignition.Easy to use and read with large backlight LCD display and menu-driven operation.Support languages: English,Deutsch ,Italiano,francais,Espanol,polski,русский,Nederlands,Japan and More Engine System Activation Load Test Start the engine to make the tester record the lowest voltage in this process automatically. For the 12V system, the standard voltage is 9.6V; for 24V system, the standard voltage is 16V. If the lowest voltage is higher than the 9.6V (for the 24V system, the lowest voltage is over 16V), the system is good. If the lowest voltage is lower than the standard voltage, the system is not good.Maximum Load System Test For the 12V system, the standard voltage is 12.8V, for the 24V system, the standard voltage is 25.6V. If the lowest voltage is higher than the 12.8V (for the 24V system, the lowest voltage is over 25.6V), the system runs normally. If the lowest voltage is lower than 12.8V (for the 24V system, the lowest voltage is under 25.6V), please check if the engine belt is damaged and the wires are short-circuited.Charging System Test For the 12V system, the standard maximum voltage is 15V, the standard minimum voltage is 13.3V; for the 24V system, the standard maximum voltage is 30V, the standard minimum voltage is 26.6V. If the current voltage is higher than 15V or 30V, please check the voltage regulator. If the current voltage is lower than 13.3V or 26.6V, please check the connections, wires, and engine. The Printer doesn't work or paper tape jams ?ANSWER:We will 100% check whether the product has printing problem before shipment, so the probability of failure is very low.Most of the problems are caused by improper operation.Please Check if you have the following problems:1.Printer roller problem: is the Thermal paper installed correctly? When the printer is working, the thermal printer presses the thermal paper firmly by using the roller. If the roller becomes loose, it will cause poor contact between the thermal print head and the thermal paper, and no words can be printed. At this time, you can open the cover, check whether the roller is pressed to the paper surface, and adjust it appropriately.2. Thermal paper problem: A: paper dust and dirt may cause the printer not to print correctly. B: the thermal paper has expired ? You can scratch the thermal paper with your fingernail, Make sure there is a black mark. Only on this side can be printed. If there are no scratches on both sides, the thermal paper has expired and cannot be used.3.is it Thermal paper ? Please make sure it is Thermal paper, other paper cannot be printed successfully.If you still have problems, please ASK QA OR ...what size is the Thermal paper ?thermal paper size: 2 1/4" W X 1 1/5" D ( 57mm W x 30 mm D )Included one roll thermal paper in the product.Does this require installing a 3V coin cell battery to update the printed time ?It's up to you, The 3V coin cell battery (button battery,such as CR2032) just provides power for updating the date & time,the printed date & time will be more accurate after installation.Notice:button battery can be installed on the back, it is not included.On Jun 28, 2024 at 05:35:34 PDT, seller added the following information:

Price: 119 USD

Location: Rowland Heights, California

End Time: 2024-09-28T06:27:45.000Z

Shipping Cost: 0 USD