Description: You are purchasing a used, clean, TESTED, and in working condition AutomationDirect D2-240 CPU Module that is used in a DirectLogic DL205 PLC base along with DL205 I/O modules.See photos for the D2-240 CPU specifications document. The firmware of the D2-240 CPU is version 3.3, which at the time of this posting, is the most up to date version. After testing, the CPU’s memory and all registers have been cleared and the scratch pad memory initialized, making the unit ready for end user programming. A C-more micro touch panel was used to test communications port 2 on the CPU. A simple start and stop pushbutton latch circuit with an indicator was programmed into the C-more panel, and then executed in the PLC ladder logic program. The C-more micro touch panel is not included. The photos and test subject in the photo may not be the exact unit that you receive. The unit shipped will be in like new condition with little or no scratches, or cosmetic flaws. The unit will be either placed in a D2-240 factory style CPU box, or a similar protected and carefully packed box. The primary boxed unit will be packed in a larger secondary box for final shipping. Free shipping is included. The D2-240 CPU has an on board super capacitor that will retain retentive RAM memory for a short period of time with power removed. An optional lithium battery, p/n D2-BAT, can be purchased from AutomationDirect.com that has a typical CPU battery life of 5 years. DirectSOFT Version 6 programming software can be downloaded from the vendor’s website at AutomationDirect.com for free, installed on a proper PC, and used without an activation ‘key code’, which allows a ladder program up to 100 words of memory. The full version of the software can be purchased later and activated as the user advances. Hint: Use communications port 1 for programming. Programming cables are available here on eBay. Search for ‘Automation Direct Programming Cable’. Look for part number D2-DSCBL if your PC has a built-in RS-232 port, or part number EA-MG-PGM-CBL when using a USB port on your PC. You can also order these same cables through AutomationDirect.com. Be careful of programming cables that go directly from USB to the RJ12 style phone plug, these most likely do not have the proper interface and could damage both your PC and the CPU (PLC). The seller accepts 30 day returns, as long as the unit is returned with no physical or electrical damage. The seller accepts no responsibility for the correct application or installation of this item. It is the buyer’s responsibility for the proper installation and use of this item. The seller is not liable for improper installation or use!
Price: 89 USD
Location: Hartville, Ohio
End Time: 2024-11-15T19:55:57.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: AutomationDirect
Model: D2-240
MPN: D2-240
Controller Platform: DirectLogic 205
Modified Item: No
