Description: • Support in-vehicle and out-of-vehicle testing of passenger vehicle batteries • Test 6- and 12-volt batteries: 100 - 2000 CCA • Test 12- and 24- cranking/charging systems • Test Flooded, AGM, AGM Spiral, EFB and GEL batteries • Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA • One-touch battery registration • Illustration instruction guides for battery positioning and testing • Read and erase codes of all available systems All-in-One Scanner: Battery & Electrical System Tester Autel MaxiBAS BT508 battery tester applies Adaptive Conductance technology that can identify low-capacity batteries and check battery health status quickly. Battery Replacement is also breeze for the BT508: Replace Battery, Register a new battery, Battery Reset, Auto Registration (after battery replacement), etc. Cranking & Charging System Test:Check the health of the starter Adaptive Conductance: Detect low capacity batteries, Improve the detection rate of bad batteries In-vehicle and Out-vehicle Test:Check battery real status with vehicle or not Electrical System Diagnosis: check battery system and locate error codes One-touch Battery Registration: Change battery and register a new one Battery Location Diagrams: Accurately locate the battery Battery Health Check: Check the battery capacity and startup capability All System Diagnostics (only available for one vehicle brand): Scan all system diagnostics just for one vehicle brand Intelligent Adaptive Conductance Technology Autel MaxiBas BT508 has advanced adaptive conductance function, which can dynamically adjust the algorithm according to battery noise, voltage, and surface charge, accurately detect battery capacity and power to reduce the probability of misjudgment. Reduce battery misdiagnosis: State statistics show that 50% of recycled batteries are good and only need to be recharged. Battery tester BT508 adopts adaptive conductance technology will improve diagnostics accuracy to 95.59%, higher than 92.06% of conductance profile. Reduce charge and reset of discharge battery: Other competitive battery testers cannot conduct SOH test to identify discharge battery, which will lead to invalid reset and charge. Using adaptive conductance technology, the battery tester BT508 can quickly detect battery SOH, saving diagnostic wait time by 50%. Diagnose low capacity batteries: If the battery tester does not quickly identify the capacity status of the battery, there will be some misdiagnosis, which can lead to increased costs and wasted batteries. Battery tester Autel BT508 will improve bad detection rate to 63.55%, which is 15%(56.36%) faster than the battery tester using conductance profiling. Compared to conductivity profiling, adaptive conductivity uses dynamic loads instead of fixed loads, which can be adjusted via in-vehicle environment, making battery diagnosis faster and more stable. Adaptive conductance has a 30A discharge (conductance profile is 10A) for faster battery testing and diagnosing. Choose BT508 battery scanner with adaptive conductance capability to speed up diagnostic maintenance!!! Cranking/ Starter Test & Generator Test & Battery Test BT508 has same functions as BT608 on Cranking/ Starter Test & Generator Test and Battery Test. Cranking/ Starter Test：Test 12V and 24V cranking/ charging systems for cranking Amps, engine cranking speed Generator Test: Test generator systems for pipple, off-load voltage, load voltage current, load current, load capacity of the battery, etc Battery Test: Check Battery condition in-vehicle or out-vehicle Battery Replacement Diagram Guide Step-by-step: With BT508 battery tester, you are allowed to perform whole battery change steps one by one: Battery Type Suggestion: Checking battery real condition first and deter whether change battery Save Battery Information: Save vehicle’s onboard data when vehicle’s battery is removed or disconnected Replace the Battery: Replace the battery step by step as prompted Register a new battery: After replacing new battery, we need use BT508 connect battery and vehicle control module, registering this new battery into vehicle electrical system modules. Choose right battery information: Select the previously stored battery information Note: According to the instructions on the screen, different battery registration process is varied by vehicels, please operating by actual condition. Battery Types & Standards Compatible battery types and standards are as follows: Types: FLOODED, AGM, AGM SPIRAL, EFB, and GEL Standards: CCA, SAE, CA, EN, EN2, IEC, DIN, JIS, MCA, BCI, and GB BAS Manager BAS Manager allows you to establish a Bluetooth connection to check and update the firmware version. Repair Reports Battery Test App can save history scan reports from your diagnostic sessions. A PDF can also be generated for the easy viewing, sharing, and printing of these reports. Autel MaxiBAS BT508 is capable to read/clear codes, view live data, ECU info, Freeze Data Frame, Auto VIN for all vehicle systems including Engine, Body, Chassis, ECM, TCM, ABS, SRS, BCM, IMM, BMS, SAS, Fuel System, Light System, Wiper System, etc. Note: Only one brand vehicle can be choosed. If you need other vehicles system diagnosis function, please pay subscription fee to open up. Locate Battery Position You can freely view the battery position on the screen and pinpoint the battery position. Multi-Language If you want to chang language, you can send above S/N (12 digits) to us to free change languages. Package List MaxiBAS BT508 Battery Clamp Cable (Black) Battery Clamp Cable (Red) VP200 User Quick Guide Packing Box On Jul 2, 2024 at 04:21:18 PDT, seller added the following information:
Price: 259 USD
Location: Perth Amboy, New Jersey
End Time: 2025-01-16T03:35:04.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Autel
Manufacturer Part Number: Does Not Apply
Vehicle Type: Passenger Vehicle
Warranty: 1 Year
Connectivity: Bluetooth
Model: Autel MaxiBAS BT508
Similar Item: MaxiBAS BT506,BT608,BT609,BTAK,BTMS
Supported System: Read/Clear codes
Features: Backlit Display, Check Engine Light Shut Off, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
OBD Interface: OBDII
Input Voltage: 5 V DC
Working Current: < 150 mA at 12 V DC
Internal Battery: N/A
CCA Range: 100 to 2000 A
Voltage Range: 6 to 36 V
Working Temperature: -10°to 50° C (14° to 122° F)
Storage Temperature: -20° to 60° C (-4° to 140° F)
Dimension (L x W x H): 107 mm (4.21“) x 75 mm (2.95”) x 26 mm (1.02”)
Weight: 320 g (0.7 lb.)
