AURORA 1/48 CURTISS JN-4 JENNY WW1 USAS BIPLANE TRAINER BARNSTORMER Kit *NO BOX*

Description: AURORA 1/48 CURTISS JN-4 JENNY WW1 USAS BIPLANE TRAINER BARNSTORMER Kit *NO BOX* AURORA 1/48 CURTISS JN-4 JENNY WW1 USAS BIPLANE TRAINER BARNSTORMER Kit *NO BOX* *****PLEASE READ THIS NOTE - THIS AUCTION IS FOR THE COMPLETE ORIGINAL MODEL, INSTRUCTIONS AND DECALS BUT THERE IS NO BOX. YOU WILL RECEIVE A BAG CONTAINING THE ABOVE. PERFECT FOR THE BUILDER WHO WANTS TO ACTUALLY CONSTRUCT THIS VINTAGE MODEL MAYBE TO TAKE A SECOND TRY AT THE ONE THEY BUILT AS A KID!***** IF YOU HAVE ANY OTHER QUESTIONS OR CONCERNS, PLEASE ASK ME BEFORE BIDDING / PURCHASING ï¿½ I WANT EVERYONE TO BE 100% SATISFIED WITH NO SURPRISES OR MIS-UNDERSTANDINGS IF YOU ARE BUYING MULTIPLE KITS FROM ME AT THE SAME TIME (OR EXPECT TO IN THE NEAR TERM) THEN LET ME KNOW AND I WILL COMBINE ALL INTO A SINGLE SHIPMENT AND ADJUST THE FINAL INVOICE TO REFLECT THE MOST ECONOMICAL SHIPPING METHOD AVAILABLE TO YOUR ADDRESS ------------------------------------------------------------------------------ Additional Information from Internet Encyclopedia The Curtiss JN-4 "Jenny" was one of a series of "JN" biplanes built by the Curtiss Aeroplane Company of Hammondsport, New York, later the Curtiss Aeroplane and Motor Company. Although the Curtiss JN series was originally produced as a training aircraft for the U.S. Army, the "Jenny" (the common nickname derived from "JN-4", with an open-topped four appearing as a Y) continued after World War I as a civil aircraft, as it became the "backbone of American postwar [civil] aviation." Thousands of surplus Jennys were sold at bargain prices to private owners in the years after the war and became central to the barnstorming era that helped awaken America to civil aviation through much of the 1920s. Curtiss combined the best features of the model J and model N trainers, built for the Army and Navy, and began producing the JN or "Jenny" series of aircraft in 1915. Curtiss built only a limited number of the JN-1 and JN-2 biplanes. The design was commissioned by Glenn Curtiss from Englishman Benjamin Douglas Thomas, formerly of the Sopwith Aviation Company. The JN-2 was an equal-span biplane with ailerons controlled by a shoulder yoke in the aft cockpit. It was deficient in performance, particularly climbing, because of excessive weight. The improved JN-3 incorporated unequal spans with ailerons only on the upper wings, controlled by a wheel. In addition, a foot bar was added to control the rudder. The 1st Aero Squadron of the Aviation Section, U.S. Signal Corps received eight JN-2s at San Diego in July 1915. The squadron was transferred to Fort Sill, Oklahoma, in August to work with the Field Artillery School, during which one JN-2 crashed, resulting in a fatality. The pilots of the squadron met with its commander, Capt. Benjamin Foulois, to advise that the JN-2 was unsafe because of low power, shoddy construction, lack of stability, and overly sensitive rudder. Foulois and his executive officer Capt. Thomas D. Milling disagreed, and flights continued until a second JN-2 crashed in early September, resulting in the grounding of the six remaining JN-2s until mid-October. When two new JN-3s were delivered, the grounded aircraft were then upgraded in accordance with the new design. In March 1916, these eight JN-3s were deployed to Mexico for aerial observation during the Pancho Villa Expedition of 1916ï¿½1917. After the successful deployment of the JN-3, Curtiss produced a development, known as the JN-4, with orders from both the US Army and an order in December 1916 from the Royal Flying Corps for a training aircraft to be based in Canada. The Canadian version was the JN-4 (Canadian), also known as the "Canuck", had some minor differences from the US version, including a lighter airframe, ailerons on both wings, a bigger and more rounded rudder, and differently shaped wings, stabilizer, and elevators. The Curtiss JN-4 is possibly North America's most famous World War I aircraft. It was widely used during World War I to train beginning pilots, with an estimated 95% of all trainees having flown a JN-4. The U.S. version was called "Jenny", a derivation from its official designation. It was a twin-seat (student in front of instructor) dual-control biplane. Its tractor propeller and maneuverability made it ideal for initial pilot training with a 90 hp (67 kW) Curtiss OX-5 V8 engine giving a top speed of 75 mph (121 km/h) and a service ceiling of 6,500 ft (2,000 m). The British used the JN-4 (Canadian), along with the Avro 504, for their primary World War I trainer using the Canadian Aeroplanes Ltd. indigenous variant. Many Royal Flying Corps pilots earned their wings on the JN-4, both in Ontario and later in winter facilities at Camp Taliaferro, Texas. Although ostensibly a training aircraft, the Jenny was extensively modified while in service to undertake additional roles. Due to its robust but easily adapted structure able to be modified with ski undercarriage, the Canadian Jenny was flown year-round, even in inclement weather. The removable turtle-deck behind the cockpits allowed for conversion to stretcher or additional supplies and equipment storage, with the modified JN-4s becoming the first aerial ambulances, carrying out this role both during wartime and in later years. Most of the 6,813 Jennys built were unarmed, although some had machine guns and bomb racks for advanced training. With deployment limited to North American bases, none saw combat service in World War I. The Curtiss factory in Buffalo, New York, was the largest such facility in the world, but due to production demands, from November 1917 to January 1919, six different manufacturers were involved in production of the definitive JN-4D. Production from spare or reconditioned parts continued sporadically until 1927, although most of the final orders were destined for the civil market in Canada and the United States. Like the re-engined 'JN-4H' version of the most-produced JN-4 subtype, the final production version of the aircraft was the JN-6, powered by a Wright Aeronautical license-built, 150-hp (112-kW) Hispano-Suiza 8 V-8, first ordered in 1918 for the US Navy. A floatplane version was built for the Navy which was so modified, it was essentially a different airframe. This was designated the N-9. In U.S. Army Air Service usage, the JN-4s and JN-6s were configured to the JNS ("S" for "standardized") model. The Jenny remained in service with the US Army until 1927. After World War I, thousands were sold on the civilian market, including one to Charles Lindbergh in May 1923, in which he then soloed. Surplus US Army aircraft were sold, some still in their unopened packing crates, for as little as $50, essentially "flooding" the market. With private and commercial flying in North America unhampered by regulations concerning their use, pilots found the Jenny's slow speed and stability made it ideal for stunt flying and aerobatic displays in the barnstorming era between the world wars, with the nearly identical Standard J-1 aircraft often used alongside it. Some were still flying into the 1930s. JN-4 airframes were used to produce early Weaver Aircraft Company / Advance Aircraft Company / Waco aircraft, such as the Waco 6. FREE scheduling, supersized images and templates. Get Vendio Sales Manager.Make your listings stand out with FREE Vendio custom templates! FREE scheduling, supersized images and templates. Get Vendio Sales Manager. Over 100,000,000 served. Get FREE counters from Vendio today!

Price: 19.96 USD

Location: San Diego, California

End Time: 2025-01-05T16:15:30.000Z

Shipping Cost: N/A USD