Aruba AP-635-US Campus Wireless Access Point

Description: Came from a local university when they upgraded their equipment. Tested and works properly. Pics are of the item(s) you will receive. High performance, more capacity The 630 Series APs are designed to take advantage of the 6 GHz band, which translates into far greater speeds, wider channels for multi-gigabit traffic, and less interference. It delivers 3.9 Gbps maximum aggregate data rates Tri-radio, 2x2:2 MIMO in all three bands (3.9Gbps aggregate peak).More wireless capacity with ultra tri-band filteringAruba 630 Series APs take advantage of the 6 GHz band and include ultra tri-band filtering and dual 2.5 Gbps ethernet ports to eliminate coverage gaps and deliver fast, secure connectivity.Business continuityEnsures high availability with two 2.5 Gbps HPE® Smart Rate ethernet ports for hitless failover for both data and power.Built-in securityIncludes Wi-Fi 6E standards such as WPA3 and Enhanced Open and WPA2-MPSK for stronger encryption and authentication.Role-based accessImproves security and ease of management by allowing IT to centrally configure and automatically enforce role-based policies across wired and wireless networks.Client steeringSteers traffic from the noisy 2.4 GHz band to the preferred 5 GHz or 6 GHz band based on device capabilities and dynamically steers traffic to load balance APs.Wi-Fi radio specificationsAP type: Indoor, tri radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 2x2 MIMO2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate with 2SS HE40 802.11ax client devices5GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate with 2SS HE80 802.11ax client devices6GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with 2SS HE160 802.11ax client devicesUp to 512 associated client devices per radio, and up to 16 BSSIDs per radioSupported frequency bands (country-specific restrictions apply):2.400 to 2.4835GHz ISM5.150 to 5.250GHz U-NII-15.250 to 5.350GHz U-NII-25.470 to 5.725GHz U-NII-2E5.725 to 5.850GHz U-NII-3/ISM5.850 to 5.895GHz U-NII-45.925 to 6.425GHz U-NII-56.425 to 6.525GHz U-NII-66.525 to 6.875GHz U-NII-76.875 to 7.125GHz U-NII-8Available bands and channels: Dependent on configured regulatory domain (country)Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5GHz bandSupported radio technologies:802.11b: Direct-sequence spread-spectrum (DSSS)802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 8 resource units (37 for the 6GHz radio)Supported modulation types:802.11b: BPSK, QPSK, CCK802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM (proprietary extension)802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM (proprietary extension)802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, and 1024-QAM802.11n high-throughput (HT) support: HT20/40802.11ac very high throughput (VHT) support: VHT20/40/80802.11ax high efficiency (HE) support: HE20/40/80/160Supported data rates (Mbps):802.11b: 1, 2, 5.5, 11802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM (proprietary extension)802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80); 1,083 with 1024-QAM (MCS10 and MCS11, proprietary extension)802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)802.11ax (5GHz): 3.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)802.11ax (6GHz): 3.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160)802.11n/ac packet aggregation: A-MPDU, A-MSDUTransmit power: Configurable in increments of 0.5 dBmMaximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):Per radio/band (2.4GHz / 5GHz / 6GHz): +21 dBm (18dBm per chain)Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain.Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networksUltra Tri-Band (UTB) enables ultimate flexibility in 5GHz and 6GHz channel selection without performance degradation*Maximum ratio combining (MRC) for improved receiver performanceCyclic delay/shift diversity (CDD/CSD) for improved downlink RF performanceSpace-time block coding (STBC) for increased range and improved receptionLow-density parity check (LDPC) for high-efficiency error correction and increased throughputTransmit beam-forming (TxBF) for increased signal reliability and range802.11ax Target Wait Time (TWT) to support low-power client devices* The UTB feature was not supported on the initial AP-635 hardware, but was introduced in a hardware revision. See Aruba Field Bulletin AP2205-1 on the Aruba Support Portal for more details

Price: 289.99 USD

Location: Brenham, Texas

End Time: 2024-12-13T15:42:57.000Z

Shipping Cost: 0 USD