Armor WB25 High Gloss Wet Look Concrete Sealer and Cure & Seal 5 Gallon

Description: Water based acrylic concrete cure and seal for new concrete. Cures concrete and protects surface with a high gloss finish. The Armor WB25 is a water-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will protect the surface with a durable high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The Armor WB25 also doubles as a cure and seal and can be applied to new concrete. The Armor WB25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae. Benefits: Meets ASTM 1315 and ASTM C 309 standards Protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion Protective surface film will reduce the growth of mold, mildew, and algae on the surface Made from non-recycled US manufactured resins Easy to apply, easy to maintain, easy to re-coat UV resistant, breathable Uses: The Armor WB25 is a great choice for a variety of interior and exterior concrete applications, including: Pool decks and patios Driveways, walkways, and stairs Garage and basement floors Retail and shop floors Warehouse floors Much more! The WB25 can be applied to a variety of interior and exterior concrete surfaces, including: Stamped concrete Poured and broom finished concrete Exposed aggregate concrete Concrete pavers New, uncured concrete The Armor WB25 is designed specifically to be used on unsealed concrete and concrete pavers. It can also be applied to concrete and concrete paver surfaces previously sealed with a water based acrylic as long as the acrylic has been properly prepped for adhesion. The Armor WB25 should not be used to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone. If you are looking to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone, consider instead of the Armor WL550 or the Armor SX5000 WB. The Armor WB25 can’t be applied over any other film forming sealer, other than a water-based acrylic sealer. It can’t be applied over a water based acrylic, an acrylic latex, a paint, epoxy, or urethane. Appearance When applied in clear, the Armor WB25 will provide a transparent high gloss finish. The actual level of gloss and enhancement received will depend on the type and age of the surface, age, porosity, condition, applicator, application method, and amount of material applied. For an accurate representation of what your surface will look like once sealed, we suggest applying the product to a test area first. Product Life When properly applied, the Armor WB25 can provide up to 1-3 years of life on an exterior surface before the need to recoat, and up to 2-7 years of life on an interior surface. While the Armor WB25 is designed to out-last and out-perform similar products on the market, there are several factors that can impact actual product life including the severity of surface abrasion and level of foot traffic, the porosity of the concrete or pavers, and the amount of resin build-up on the surface. Some surfaces need to be sealed every year, while others can go a few years without sealing. The Armor WB25 can be applied with a 3/8-1/2” nap roller, or an HVLP sprayer. For a consistent high gloss finish, apply two coats spaced 6-8 hours apart. Do not exceed 24 hours apart between coats. Time Of Day The Armor WB25 should only be applied in the early evening (around 5 PM or later) when air and surface temperatures are declining, and when the sun is no longer positioned over the surface. Surface Preparation The Armor WB25 should be applied to a completely clean and dry surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for PROFESSIONAL GRADE CONCRETE SEALER & PAVER SEALER: Enhance and protect your exterior concrete and pavers with the professional-grade Armor WB25 water-based high gloss wet look concrete sealer and paver sealer. This concrete sealer is designed for use on unsealed concrete and pavers, and concrete and pavers previously sealed with a water-based acrylic concrete sealer. SLIGHT COLOR ENHANCEMENT: Formulated with high-quality US-manufactured resins, this concrete sealer is designed to slightly darken and enhance concrete and paver surfaces. If you like what your concrete and pavers look like when wet, you will love the dramatic color enhancement offered by this wet look concrete sealer. LONG LASTING PROTECTION: In addition to offering a wet look finish, this concrete sealer will provide a durable, long-lasting, non-yellowing, professional-grade high gloss finish designed to last for years in commercial and residential applications. This concrete sealer helps to protect concrete and pavers against damage caused by surface abrasion, foot and vehicle traffic, road salts, UV rays, water absorption, snow and ice, exposure to the elements, and more! READY TO USE: Our ready-to-use concrete sealer can be applied to a properly cleaned and prepped surface with a roller or sprayer. One gallon covers up to 175-225 ft2/gallon. If you are looking for a concrete cleaner, consider the Armor MSC100 (sold separately). WATER-BASED, LOW ODOR, LOW VOC: This water-based acrylic sealer is low VOC and low odor, making it a preferred concrete sealer for interior and exterior concrete applications. HELPS AID IN PROPER CURING: This water-based acrylic sealer doubles as a cure and seal. When applied to new concrete it can help aid with proper curing. This cure and seal meets ASTM C-1315 and C-309 standards. VERSATILE: The Armor WB25 can be used on a variety of concrete surfaces including poured concrete, broom finished concrete, stamped concrete, and concrete pavers. Common applications include driveways, walkways, patios, sidewalks, curbing, walls, and more! FORMULATED FOR ALL 50 STATES: The Armor WB25 is low VOC and can be shipped to all 50 states!

Price: 236.55 USD

Location: Brentwood, New York

End Time: 2024-11-14T10:45:56.000Z

Shipping Cost: 0 USD