Agilent 1260 Infinity II HPLC Isocratic Pump (G7110B)

Description: Agilent 1260 Infinity II HPLC Isocratic Pump (G7110B) - Tested and Working Performance Specifications Agilent 1260 Infinity II Isocratic Pump (G7110B) Type Specification Hydraulic system Dual piston in series pump with servo-controlled variable stroke drive, power transmission by gears and ball screws, floating pistons Settable flow range Set points 0.001 – 10 mL/min, in 0.001 mL/min increments Recommended flow range 0.2 – 10.0 mL/min Flow precision ≤0.07 % RSD, or ≤0.02 min SD whatever is greater, based on retention time at constant room temperature Flow accuracy ± 1 % or 10 µL/min whatever is greater, pumping degassed H2O at 10 MPa (100 bar) Pressure operating range Operating range up to 60 MPa (600 bar, 8700 psi) up to 5 mL/min Operating range up to 20 MPa (200 bar, 2950 psi) up to 10 mL/min Pressure pulsation < 2 % amplitude (typically < 1.3 %), or < 0.3 MPa (3 bar, 44 psi), whatever is greater, at 1 mL/min isopropanol, at all pressures > 1 MPa (10 bar, 145 psi) Compressibility compensation User-selectable, based on mobile phase compressibility Instrument Control Lab Advisor B.02.08 or above LC and CE Drivers A.02.14 or above For details about supported software versions refer to the compatibility matrix of your version of the LC and CE Drivers Local Control Agilent Instant Pilot (G4208A) B.02.20 or above Communications Controller-area network (CAN), Enhanced Remote Interface: ready, start, stop and shut-down signals, LAN onboard Safety and maintenance Extensive diagnostics, error detection and display through Agilent LabAdvisor, leak detection, safe leak handling, leak output signal for shutdown of the pumping system. Low voltage in major maintenance areas

Price: 6850 USD

Location: Blacksburg, Virginia

End Time: 2024-09-26T12:00:01.000Z

Shipping Cost: N/A USD