Description: How to Use These Emitters: - Place the emitter stakes strategically so that the plant's root ball will be kept damp but not soaked. - Adjust the flow for each plant and again every season according to the plant size. TIP: Remember to reaccess requirements as they grow and needs change! - Use a timer to water twice a day for only 5 or 10 minutes, depending on the plant's needs and weather. - Test to make sure the moisture is getting where you want it. TIP: Don't assume rain means you can turn off the irrigation system. Leaves can redirect rainwater so it doesn't actually reach the roots! MORE TIPS: - To make the tubing MUCH easier to work with, just soak it in warm to hot water or lay it out in the sun for a little while to soften. - Be sure to hold the hole punch at a right angle to the tubing when you punch a hole and you'll get a perfect seal around the barb of the emitter. - Always a good idea to flush the system a bit before installing emitters to clear any debris. - Create your lateral lines (1/4-in. tubing and emitters) BEFORE hooking them up to the main line. - ALWAYS cut the tubing LONGER than needed! Much easier to trim off excess than to try to come up with additional lengths of tubing if miscut too short! - Your emitters farthest from the faucet will need to be set on a freely flowing adjustment due to loss of water pressure. Why do you need an automatic drip irrigation system for your container or raised garden? Simple. Containers dry out so quickly that they often require once or even twice daily watering in hot weather. So just bite the bullet and do it. These emitters worked perfectly for our irrigation systems in our veggie garden as well as for the perimeter hedge, so I don't have to lug around hoses to water them each day. A real time-saver that we should have done long ago. Irrigation Drippers Size: total length: 5.2 inches; water outlet hole diameter: 0.05 inch .Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top. Plastic Irrigation Dripper: these drip emitters are made of quality plastic. Color: Black. The bottom is sharp and easy to insert into the soil. Adjustable Water Flow: Water flow can be adjustable by rotating the water outlet hole cap. Adjust the amount of water according to actual needs, let your plant grow healthily, save water resources and save money. How to Connect: 1. Connect to the PE pipe directly. 2. Connect to the 4/7 distribution tubing. Tips: Soften the tube hole with hot water before connecting the tube and dripper. Wide Application: Suitable for pots, tubs, ground cover, landscaped gardens, flower beds, vegetable gardens, herbs gardens, greenhouse, orchard, lawn, self plant and so on.
Price: 13.16 USD
Location: Delmar, New York
End Time: 2024-12-01T10:25:19.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Color: black
EAN: 0754407776135
ISBN: 0754407776135
Package Dimensions LxWxH: 7.64x6.5x1.93 Inches
Weight: 0.46 Pounds
Type: Does not apply
Brand: QMOEH
