Adjustable 8-13” Sway Bar End Links for 3-7” Lift 01-10 Chevy GMC 2500HD 3500HD

Description: Adjustable 8-13” Sway Bar End Links for 3-7” Lift 01-10 Chevy GMC 2500HD 3500HD Adjustable 8"-13" Heavy Duty RACE Style Sway Bar End Links - Fits Most 3"-7" Lift Kits LISTING IS FOR: SSM-GM-RACE-SBELK-ADJ - 8"-13" RACE SWAY BAR END LINKS - PAIR Give your lifted vehicle a REAL Heavy Duty Sway Bar End Link and stop breaking those wimpy ones that came with your lift kit. These SSM Adjustable HD RACE sway bar end links are the perfect replacement for your worn out or broken links. These NEWLY RELEASED SSM second generation end links are adjustable and fit most 3"-7" lift kits. This adjustability allows one part number to fit many applications as well as the ability to fine tune the sway bar height. NEW ADJUSTABLE RACE MODEL!! - SSM's NEW ADJUSTABLE RACE Style Sway Bar End Link Kit for lifted vehicles. These sway bar end links will fit vehicles with after market spindle style suspension lift kits that drop only the lower control arms 3"-7". Sway bar must be run in factory orientation and position, NOT flipped, or dropped down with spacers. End links are adjustable from a range of 8" to 13" (See Picture). To achieve lengths shorter than 11.75", trimming of the threaded shaft will be required! PLEASE CHECK & MEASURE YOUR VEHICLE BEFORE PURCHASING!! Features: The SS Motorpsorts RACE STYLE end links feature a full pivot lower mounting system. This reduces stress and binding found in straight design and limited travel flex joint end links (aka RCD). This binding can lead to premature bushing failure and or complete breakage. SSM's pivoting lower clevis mount allows the lower end of the link to pivot with the lower control arm; while letting the upper section stays in line with the sway bar. This reduces binding and stress which allows for better articulation throughout the suspension cycle. This equates to better overall control, smoother suspension performance, reduced part fatigue and no more breakage. Construction: The end link top sections are made up of two parts. Threaded hex bars and the adjustable threaded rods with loop. Hex shafts are manufactured from 3/4" steel hex bar and then CNC machined on both ends. The hex bar sections are coated in black semi gloss powder coating to keep them protected and looking good. The lower sections are custom made from 9/16" steel threaded rods that are hand tig welded to custom 1018 steel shock loops. These get a killer protective yellow zinc plating as well. The complete upper section is then attached to the 3/16" thick zinc plated steel lower "U" brackets using Energy Suspension HYPER-FLEX ™ Performance Polyurethane shock bushings. This lower joint uses a Polyurethane shock bushing, 3/4" O.D. x .120 wall 4130 Chrome-Moly steel sleeve and 1/2" Grade 8 bolts to keep it joined together. For the sway bar end we have sourced larger, correct dimension, Energy Suspension HYPER-FLEX ™ Performance Polyurethane sway bar end link bushings. These larger bushings are the correct size for the HD sway bar and are not a universal one size fits all bushing. The larger Energy Suspension sway bar bushings are made from a firm polyurethane and provide more overall mass and surface area than the smaller universal style sway bar bushings. Lastly, everything is held together with zinc plated Grade 8 bolts, lock nuts and washers. A must have for any serious off-road enthusiast or racer that demands the best! We will even let you run these on your everyday street ride too!! Set does both sides. MADE IN THE USA!!! Need RACE end links to fit a stock or leveled height HD. Please contact us or see our other listings for the (SBELK-1) (7" Length) non-adjustable units. Applications: (with most 3"-7" spindle lift kits) 1999-2006 - Chevy Silverado 1500 (4wd Only - Filling May Be Required) 1999-2006 - GMC Sierra 1500 (2 & 4wd) 2001-2019 - Chevy Silverado 1500HD, 2500, 2500HD, 3500 (2 & 4wd) 2001-2013 - Chevy Suburban 2500, Avalanche 2500 (2 & 4wd) 2001-2019 - GMC Sierra 1500HD, 2500, 2500HD, 3500 (2 & 4wd) 2001-2013 - GMC - Yukon XL 2500 (2 & 4wd) 2003-2009 - Hummer H2, H2T (8-lug) This link kit is for spindle style suspension lift kits which drop only the lower control arm 3"-7". Must run sway bar like it came from the factory, NOT Flipped, or dropped down with spacers. Adjusts 8"-13" long from the top of the lower arm to bottom of the sway bar (see picture below). PLEASE MEASURE YOUR VEHICLE BEFORE PURCHASING!! Part # SSM-GM-RACE-SBELK-ADJ Powered by SixBit's eCommerce Solution

Price: 124.99 USD

Location: Buena Park, California

End Time: 2024-10-07T21:04:16.000Z

Shipping Cost: 0 USD