AC Comprssor Fits For Lexus RX350 3.5L 2010-2014 AC Compressor AEG369 New

Description: Fits For Lexus RX350 3.5L 2010-2014 AC Compressor AEG369 New Item specifics: Condition：New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Interchange Part Number：CO 29042C, 157369, 98315, 4711017, 6512814, 7512814, 2021662, 140893NEW, 8832048260, 8832048280 Grooves：7 Color: Silver Manufacturer Part Number：AEG369 Fitment Fits Lexus RX350 3.5L 2010 2011 2012 2013 2014 REMOVING THE OLD COMPRESSOR 1. Open the hood of the vehicle and locate the A/C Compressor. 2. Remove the A/C belt from the A/C Compressor pulley. This may involve loosening the belt tensioner (if it is equipped). 3. Evacuate the A/C system using a refrigerant recovery machine. 4. Disconnect the negative battery cable. 5. Remove the bolt that secures refrigerant lines to the A/C Compressor. Then, inspect the A/C lines for any contamination such as metal or excessive dirt inside them. If any contamination is found, the system will need to be cleaned. 6. Disconnect any electrical connectors from the A/C Compressor. 7. Remove the AC Connections. Remove the A/C Compressor mounting bolts. 8. Remove the A/C Compressor from the vehicle. INSTALLING THE NEW A/C COMPRESSOR 1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle. 2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed. Flush evaporators from inlet to outlet. Flush condensers from outlet to inlet. NOTE: Condensers produced from 1990 – present are extremely difficult to clean. As a result, if the compressor had a major failure, it is recommended that the condenser be replaced. 3. This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system. 4. Install the new receiver drier or accumulator, and new expansion valve or orifice tube. 5. Next, install the new A/C Compressor. 6. Install and tighten the A/C Compressor mounting bolts. 7. Reconnect any electrical connectors to the A/C Compressor. 8. Re-install the refrigerant lines and A/C belt to the A/C Compressor. 9. Reconnect the negative battery cable. 10. Evacuate the A/C system with an A/C servicing machine for at least one hour. 11. Check the system for leaks. 12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system. 13. Start the vehicle’s engine and turn on the A/C system. Make sure the windows and doors of the vehicle are open. About us Freely contact us by email before you open any cases and return requests. We'll spare no effort to solve your problems. Product can only be returned in Unused NEW condition. Please kindly note, we do not pay return shipping fee for the reason below: 1, Changed Your Mind, 2, Does not fit or like them, 3, Any personal reaons which is not of the quality of the item. *We offer 100% customer satisfaction. *We fully stand behind with all the items that we are selling! *Please check our stores for other car and truck parts. *Please leave us positive feedback if you are satisfied with the item. *But in case you aren't satisfied the item, please kindly let us know, we will try our best to solve it. *Thank you for reading.

Price: 986.69 USD

Location: Los Angeles, California

End Time: 2024-01-23T18:03:35.000Z

Shipping Cost: 0 USD