ABN | Rear Trailing Arm Bushing Tool – Trailing Arm Bushing Remover & Installer

Description: Our eBay Store About Us Contact Us Add to Favorite Sellers ABN | Rear Trailing Arm Bushing Tool – Trailing Arm Bushing Remover & Installer 92.99 If your car rolls and rocks side to side on the highway and feels like it is being pushed around by an imaginary crosswind, replace your worn out trailing arm bushing with the ABN Rear Trailing Arm Press Tool Bushing Kit. To prevent an increase in friction on the insides of the extractor due to the top and bottom edges of the link growing apart, do not remove the jaws of the tool from the trailing arm. If you install the bushing crooked and it does not seat properly, you can press it out and repeat. To easier set the new bushing in the correct spot, you can measure the distance from the trailing arm bush to the trailing arm and mark the old bushings before removal. Apply lubrication on this tool before use. 14mm socket size required to rotate the thread, not included. Warning: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. Product Details REPLACE CAR BUSHES: Use the ABN Trailing Arm Bushing Removal Tool for replacement of the rear trailing arm bush (moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to) on your Honda or Acura vehicle FITS YOUR VEHICLE: For Honda or Acura vehicles with trailing arm bushings; Applicable for Honda – Civic 1988-2000, CRV 1997-2001, CRX 1988-1991, Del Sol 1993-1997 and Acura – Integra 1994-2001, Integra 1990-1993 EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization SIMPLE & SAFE DESIGN: Hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines, or emergency brake cables EASY TO USE: Remove wheels and body lateral link bolts (watch for any camber shims between the body and the link), loosen (not remove) the toe link bolts, remove the trailing arm bush bolts, pull the trailing arm down enough to put on tool (you may need to disconnect brake line bracket/parking brake bracket on trailing arm), apply lubrication to trailing arm bush, use tool to push out the trailing arm bush, clean, lubricate, install new trailing arm bush, reassemble; 14mm socket not included

Price: 92.99 USD

Location: Sioux Falls, South Dakota

End Time: 2024-01-05T21:41:58.000Z

Shipping Cost: 0 USD