AA Primary and Secondary S3 Clutches for 2021+ Polaris Ranger XP 1000 DOHC

Description: AA Primary and Secondary S3 Clutches for 2021+ Polaris Ranger XP 1000 DOHC Fitment:2021+ Polaris Ranger XP 1000 DOHCFeatures:A simply must have when running larger tiresFaster accelerationWicked throttle response and quicker down shiftsCooler running belt temps (especially when running larger tires)Longer belt and clutch lifeMore consistent clutch performanceEasily adjustable if neededHelix features a tighter roller & EBS pocket for less clutch slop(clunk) and less chance of rollers breakingKit Includes:Assembled Primary Drive ClutchAssembled Secondary Driven ClutchSelect Kit: (INCLUDE SELECTION IN CHECKOUT NOTES)Performance Helix 107-1065: Aggressive helix with acceleration/higher horsepower/aggressive fast pace drivers in mind. Works best on Rangers with 27-30" tires and OEM gearing or those running 31-35" tires with gear reduction. High Load Helix 107-1062: Slightly less aggressive than the 1062 helix with good acceleration gains/power transfer over the OEM helix. Designed for a heavier vehicle, heavier tires, heavy sand load or crawling type riding in mind. Works best on Rangers with 31-35" tires and OEM gearing. Excellent all around helix for any Ranger! Note: Can take up to 5 business days handling time for assembly. Note: You will need the P90X clutch puller to remove your OEM clutch. The AA clutch uses the standard XPT/XP1000 primary clutch puller. DISCLAIMER/SPECIAL NOTES ABOUT THIS CLUTCH: This clutch is louder at idle as these clutches have a loose spider/slider tolerance until engine RPM ramps up. This clutch is tight under the cover and MAY slightly contact the plastic at idle, making a few wear marks(extremely uncommon, but we have seen it due to cover variances). The primary bolt has a turned down (shortened) head to clear under the cover. This is easier to strip, so use care when tightening and make sure you use an 18mm 6 point socket. If dissembling the clutch, the 6 spring cover button head Allen bolts are also easy to strip if you use the wrong size(or standard), they are a 4mm.

Price: 1695 USD

Location: Monticello, Georgia

End Time: 2025-02-02T20:21:30.000Z

Shipping Cost: 0 USD