9800 Aftermarket Controller Fisher EZ-V Plow Handheld Control Round Black Plug

Description: An Aftermarket Control to replace the expensive factory Fisher 9800 control.This has a round screw-on plug with 14 holes, but uses only 10 pins. This is used on the Fisher EZ V plow (also works on Western MVP V.) Check your plug. It only fits the EZ-V, not the Extreme V. This control has designated buttons, so no mode button. It has one button for every function. This comes with a dash bracket. NOTE: There is a modification required for this control to work that you can read below. It is a simple modification, but it is not a plug and go item. Control plugs directly into your existing harness, NO adapter required, just Plug-N-PlowPlease make sure the connector matches your connector before ordering4 way operationAutomatic Shut-off when not in use, approximately 22 minutesThe plow blade will coast to a soft stop (left or right), results in smoother operation and decreased wear on the plows hydraulic systemExpress Up/Down FeatureOn/Off switch can be used as an Emergency Stop when requiredIlluminated keypad on control for night time plowingAll control functions will time out (shut-off) after a period of time. This helps reduce wear on the pump motor and prevent unnecessary battery drain, Up-button, times out after 2.6 seconds, while left and right functions time out after 3 secondsFlexible Straight CordUse for both Left or Right HandDash Mount Control Holder IncludedInstructions come with each control

Price: 260 USD

Location: Bernville, Pennsylvania

End Time: 2024-04-23T16:36:42.000Z

Shipping Cost: 13.6 USD