Description: ALPS 10K Potentiometer 8x OEM trim pot resistor was made by ALPS. It fits ALPS analog joysticks. This trimmer potentiometer works with PS3, PS4 DualShock 4 series (PS4, Slim and Pro), Xbox One series (Xbox One, One S|X), Elite Series 1 and 2, and newest Xbox Series S|X. It’s also compatible with Nintendo Switch Pro and some 3rd party controllers like 'Scuf’ and 'Razer Raiju Ultimate’ with 10KO ALPS thumbstick module inside 1. Solve most of joystick problems: 80% chances of joystick problems were caused by the potentiometer. In another words, the rotary mechanism and the tactile switches are not the problem. You can simply replace the side potentiometer sensor alone to solve most of the problems 2. Additional resistors included: Complicated moving mechanism and daily wear and tear can cause drifting, and even new potentiometers can not be 100% balanced. Calibrating in controller settings might not work. Please solder one or more paralleled resistors at the opposite direction against drifting Compatibility Notes: 1.ALPS version is not interchangeable with the orange version made by Favor Union 2.ALPS potentiometers come in two different resistance values. Never judge its value by its color. Please make sure the resistance value is 10K ohm before ordering 3.Please choose 2.1K ohm for PS5 DualSense and some rare PS4 controllers [ALPS 10KΩ Potentiometer] – The OEM trim pot resistor was made by ALPS. It fits ALPS analog joysticks. This trimmer potentiometer works with PS3, PS4 DualShock 4 series (PS4, Slim and Pro), Xbox One series (Xbox One, One S|X), Elite Series 1 and 2, and newest Xbox Series S|X. It’s also compatible with Nintendo Switch Pro and some 3rd party controllers like 'Scuf’ and 'Razer Raiju Ultimate’ with 10KΩ ALPS thumbstick module inside [Compatibility] – ALPS sensors come in two different resistance values. Make sure the value is around 10K ohm before ordering. Never judge its value by its color. (Be noticed: Choose 2.1KΩ version for PS5 DualSense and some rare PS4 controllers. ALPS version is not interchangeable with the orange version made by FU.) [Additional Drift Fix PCB] – Several factors cause joystick drifting a common issue. Even new joysticks can drift. The potentiometer was born without precision. Wear to the carbon film, spring fatigue and material stretching made it not centered. Dust, moisture and drop make it worse. We packed PCB to fix the problem of drifting in one direction. Simply adjust the variable resistor to eliminate the drifting [For most joystick problem] – The potentiometer sensor needs to be replaced when the controller has the problem of creeping, stuttering, a blind spot, a dead spot, a dead zone, or it wouldn't center after years of wear and tear. De-soldering the unit with only 3Pins will be a lot easier than replacing the entire joystick with as many as 14 prongs [Reminder of Replacement] – Use a pair of pliers to separate the problem sensor off the joystick module. Try to replace the wiper first, see if it works. De-solder the sensor off the PCB. A metal pick helps to clear the holes. Soldering the new unit in is a breeze. Remember to calibrate the new control sticks in settings
Price: 27.48 USD
Location: Eugene, Oregon
End Time: 2024-12-03T11:39:32.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: ElecGear
Type: Does not apply
Package Dimensions LxWxH: 5.2x3.54x0.43 Inches
Size: ALPS 10KΩ Potentiometer
Color: ALPS 10KΩ Potentiometer
Compatible Model: Does not apply
Weight: 0.02 Pounds
