6x5.5 Wheel Spacers 1.5" Hubcentric 6x139.7 for Tacoma 4Runner FJ Cruiser Tundra

Description: Wheel Spacer SpecificationsQuantity: Four (4)Thickness: 1.5" (38mm)Bolt Pattern: 6x5.5" (6x139.7mm)Center Bore: 106mmStud/Nut Thread Pitch: M12x1.5Compatible with:1995-2015 Toyota Tacoma (1st Gen, 2nd Gen) 4WD/Pre-Runner/VVT-i (not fit 2WD S-Runner or X-Runner)2016-2023 Toyota Tacoma (3rd Gen)2000-2006 Toyota Tundra1989-2023 Toyota 4Runner (3rd Gen, 4th Gen, 5th Gen)2007-2023 Toyota FJ Cruiser2004-2019 Toyota Ventury2005-2023 Toyota Fortuner1982-1997 Toyota Land Cruiser1990-2023 Toyota Land Cruiser Prado2001-2007 Sequoia1989-2009 HILUX SURF1979-2020 HILUX 4WD2015-2020 HILUX REVO2002-2009 GX4702010-2023 GX460BENEFITS:Positions your wheels 1.5 inches outwardAllows installation of wider wheels & tiresIncreases your vehicle's track-widthHydraulic Pre-Pressed Studs eliminate the risk of vibrationsImproves the look of your vehicleTECHNOLOGY:High Tensile Strength Forged 6061-T6 AluminumPrecision CNC Machined ensure high accuracy and safetyHard Anodized for durablityHigh quality pre-installed heat treated 12.9 grade studs1 2 3 4Installation ProcedureStep 1:Following your vehicle owner's manual, proper raise the vehicle and support it using adequately load-rated jackstands.Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, don't continue with this installation.Remove any wheel visible rust from the mating flange on the vehicle's rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstruction which could prevent proper seating of the spacer/adapter.Step 2:If proper seating can be achieved, apply provided thread locker to vehicle's studs and mount the wheel spacers on to rotor by torquing provided wheel spacers/adapter lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.Install wheel on to wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.DO NOT USE AN IMPACT WRENCH.Step 3:Check that wheel and tire clearance allow for full steering(lock-to-lock).If there is no interference, vehicle may be lowered.Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles.

Price: 74.99 USD

Location: Los Angeles, California

End Time: 2024-09-07T02:24:56.000Z

Shipping Cost: N/A USD