6HP 2 Stroke HANGKAI Outboard Engine Fishing Boat Motor Water Cooling CDI System

Description: Package Included 1x Outboard Motor 1x Funnel 1x Proportioning Pot 1x Water Pump Impeller 1x Split Pin 1x Flameout Roop 1x Start Roop 1x Installation Tool Kit 1x User Manual All Accessories for Assembly Application The outboard motor is suitable for a variety of small watercraft, such as fishing boats, dinghies, and inflatable boats.6HP 2 Stroke HANGKAI Outboard Engine Fishing Boat Motor Water Cooling CDI SystemDescriptionDescriptionHave you encountered any difficulties in venturing into long-distance deep water? An outboard motor that can handle various complex water conditions can provide you with assistance! The powerful 6-horsepower two-stroke engine allows you to overcome obstacles in various environmental waters and quickly reach the places you need to go with excellent speed. The large-capacity fuel tank also eliminates the hassle of frequent refueling. With its companionship, you can fully enjoy the pleasure of sailing and become a reckless captain! Key FeaturesFast & Powerful: A 2-stroke engine with a maximum output of 4.4kw and 6hp, and a maximum speed of 5500rpm, provides you with unparalleled speed. The streamlined design of a 7'' three-blade propeller can reduce water resistance and provide stronger power during operation. Selected Material: Lightweight and sturdy aluminum alloy, combined with spray painting technology, provides excellent corrosion resistance, wear resistance, heat resistance, shock resistance, deformation resistance, and other properties. You can use it with confidence in fresh water and salt water. Easy to Operate: The throttle lever directly controls acceleration and steering. The step-less speed regulation allow you to easily adjust the running speed, combined with simple gear shifting (forward, neutral, or reverse), bringing you a more comfortable and convenient user experience. Low Noise: The large muffler above can isolate most of the noise, making the sound of the machine running around 80 decibels, allowing you to hear other movements on the water and remain vigilant. Small & Fuel-efficient: As an outboard motor, it is relatively small(43.3*14.56*21.26in) and lightweight(45.3lbs), making it very suitable for small ships and people who frequently navigate short distances. An efficient carburetor burns fuel more fully, with a fuel consumption rate of 0.66gal/h not only saving fuel but also reducing expenses. Safe & Reassuring: The reliable CDI ignition system can quickly and safely start the motor, and suspension tilt adjustment pins and anti-vortex plates reduce inclination and vortices, ensuring smooth operation. The water cooling system is designed to maintain the optimal temperature, coupled with overheating protection, allowing you to continuously enjoy the fun of the navigation. Complete Set: In addition to the outboard motor, our package also includes a funnel, manuals, safety rope, etc., which can meet your usage needs at once. Protective Packaging: This product comes in a custom foam that resists common compression and falls to prevent product damage in transit as much as possible. DetailsLocking Handle: The locking handle below the muffler allows you to easily open the casing to check the internal motor. Tail Plate Clamping Bolt: It can firmly fix the outboard motor on your ship and is not easy to slide. Rubber Handle Cover: The rubber-wrapped handle is softer and increases friction, providing a more reliable grip. Cooling Water Outlet: You can determine whether the water pump is working properly by checking whether it is producing water, to promptly repair the engine if it may malfunction. ApplicationIt is suitable for rubber boats, inflatable boats, fishing boats, sailboats, yachts, canoes, kayaks, rubber boats, aluminum alloy boats, etc. with a stern height of 17.32 inches or less, assisting aquaculture, water transportation, net fishing, luring, outboard backup, outings, and river cleaning/maintenance. SpecificationsMaterial: Aluminum AlloyColor: BlackSurface Treatment: Spray PaintAssembly Required: NoNumber of Items: 1Engine: 2-stroke 6hpDisplacement: 102ccGear Ratio: 2.08(27:13)Number of Cylinder: 1Max. Output: 4.4KWMax. Speed: 4500-5500r/MinNoise: About 80DBGear Positions: F-N-RIgnition System: CDICooling System: Water-coolingControl System: Tiller ControlStarting System: Manual StartGasoline: No.92 Lead-free GasolineFuel Type: Mixed Oil (50 Gasoline: 1 2-stroke Engine Oil)Trim And Tilt System: Manual TiltFuel Tank Capacity: 2.5L/0.66galFuel Consumption Rate: 2.5L/0.66gal/hBore*Stroke: 5.5*4.3cm/2.16*1.7in Propeller Diameter: 18cm/7in Handle Length: 36cm/14.17inAdaptive Transom Plate Height: ≤44cm/17.32inGross Weight: 24.15kg/53.24lbsNet Weight: 20.55kg/45.3lbsProduct Size: 105*48*24cm/41.3*18.9*9.4inPackage Size: 110*37*54cm/43.3*14.56*21.26in Package Included1x Outboard Motor1x Flameout Rope1x Tool Kit1x Fuel Oil Mixing Bottle1x Funnel1x English Manual1x English Operation InstructionsAll Accessories for Assembly NotesPlease carefully read the manual and strictly follow the precautions to have a better experience. Please measure the height of your boat before purchasing to ensure suitability for this product.Please start the motor in the water. If the motor stops circulating water, please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked.Please note that this product should use a mixture of two-stroke engine oil and 92 # unleaded gasoline. The running-in period of the new machine is 10 hours, during which the fuel ratio is 30L (7.93 gal) of gasoline to 1L (0.26 gal) of engine oil. After 10 hours, the ratio is 50 liters (13.21 gallons) of gasoline to 1 liter (0.26 gallons) of oil.Please note that the emergency shutdown rope should be inserted when the outboard motor is started, and the other end should be wrapped around your wrist or belt.Please do not drive too fast during the running-in period. After the running-in period, the gear oil needs to be replaced, and the second replacement time is about 100 hours or 6 months later.Please do not leave this product outside until the cooling water is completely used up. Otherwise, water will enter the cylinder through the exhaust port, leading to engine failure. After cruising in seawater or turbid water, please clean the outboard motor with fresh water and cool the water channel with fresh water. The engine should be stored in a dry and well-ventilated place, and avoid direct exposure to sunlight.If not in use for a long time, please thoroughly clean the gasoline in the fuel tank.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. Please note that this product is manual available in English, German and French, please contact customer service for more information. Note：Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.1Features*Nice and Practical, High Quality PackagingTypeother*Feature*Good Qualityshipping noticeCan not ship to Puerto Rico,Alaska/HawaiiManufacturer Part NumberOUTBOARDENGINE54882USShort shaft40cmEANDoes not applyUPCDoes not applyBrandHANGKAIEngine(HP)6HPOn Jul 22, 2024 at 06:57:19 PDT, seller added the following information:

Price: 537.2 USD

Location: Monroe Township, New Jersey

End Time: 2024-08-06T05:52:40.000Z

Shipping Cost: 0 USD