Description: welcome Description This 600W wind turbine generator kit includes a wind turbine, anemometer, controller, 8 blades, and other accessories, providing you with a powerful tool to help generate electricity through wind, which is environmental-friendly. It features high quality, high efficiency, and strong performance that contributes to the annual power generation. It's worth trying! Key Features Premium Material: The blades are made of Nylon fiber which is waterproof, corrosion-resistant, and lightweight, along with die-casting aluminum alloy fuselage and stainless steel fittings, making this product durable and strong. Moreover, the wire is heat-resistant and moisture-resistant, which is safe to use. Environmental-friendly: Wind power generation does not require the use of fuel, nor does it produce radiation or air pollution. High Efficiency: Controlled by MPPT intelligent microprocessor, it can effectively regulate the current and voltage(12V), and has a high utilization rate of wind energy, which contributes to the annual power generation. MPPT charge is waterproof and dustproof and can be applied to all environments and all seasons. Stable Performance: The unique magnetic circuit design makes the starting torque very small, ensuring its breeze starting ability. Moreover, the 3-phase AC permanent magnet generator and 650W maximum power help this machine reach the maximum wind speed of 60m/s. Considerate Design: The yaw adjustment system (rotating aluminum alloy fuselage and tail fin designed according to aerodynamic principle) can read the wind direction and automatically adjust the position to obtain the maximum wind energy. Modern Appearance: The round fuselage, fan-shaped blades, smooth lines, and timeless white color make this product look elegant and modern, fitting any scene. Low Vibration&Noise: The double-groove thickened ball bearing makes it more stable with low vibration. And the 40db low noise provides a more comfortable environment. Easy to Assemble&Disassemble: With complete accessories and an English manual, you can assemble this wind turbine easily. And you can disassemble these blades for convenient storage when not in use. Easy to Clean: Because of the smooth surface with plastic spraying, you can wipe the dirt from the machine and blades with a wet cloth. Protective Package: To prevent the product from being damaged and bumped during transportation, we packed it with foam to protect your products to the maximum extent possible. Buy with Confidence: We have been working hard to provide better service and quality for our customers, which is our goal. If there is any problem with our products, please contact us in time. Details Anemometer: The equipped anemometer with MODE&SET buttons, a six-blade wind wheel, and a thermal probe allows for accurate wind speed measurement. And it's anti-slip rope ensures convenient carrying. Built-in Copper Insert: The copper insert won't damage the nylon fiber material when the bolt is tightened. Flange Connection: The flange connection allows for a stable and firm connection between the wind turbine and the tower tube(excluded), making it safer to use. Round Edge: The round edge of the blades and generator prevents your hands from scratching during installation. Application It is suitable for the leisure sector, boats, gazebos, homes, RVs, cabins, and mobile homes, as well as for green windmills, corporate, and industrial energy supplements. How to InstallTake out the wind turbine, put it on the tower, and align it with the flange holes. Install four flat washers on the four bolts, and then insert the bolts into the corresponding holes of the flange. Tighten the screws with an Allen key.The three wires of the wind turbine are connected with the transmission cable, each pair of wires is not less than 30mm, and the adhesive tape at the connection end is 100mm.Connect the wind turbine cable to the controller. The battery must be connected to the controller before wiring. Specifications Color: White Material: Nylon Fiber, Die-casting Aluminum Alloy, Neodymium Iron Boron Process: Plastic Spraying, Die-casting Shape: Fan-shape, Round Style: Modern Special Feature: Durable Installation Method: Vertical Type Wind Direction Adjustment: Automatically Adjust the Windward Angle Generator Type: 3-Phase AC Permanent Magnet Generator Braking Method: Electromagnetic Anemometer Battery: One 3V Lithium Battery(Included) Number of Blades: 8 Voltage: 12V Rated Power: 600W Max. Power: 650W Start-up Wind Speed: 3m/s Rated Wind Speed: 13m/s Safe Wind Speed: 50m/s Max. Wind Speed: 60m/s Working Temperature: -40 ~ 80 ℃/-40-176℉ Noise: 40db Blade Length(Each): 40cm/15.7inch Blade Diameter(Wheel Included): 92cm/36.22inch Tower Tube Diameter: 42-45mm/1.65-1.77inch(Not Included) Package Size: 72*28*23cm/30.7*11.02*9.05inch Gross Weight: 8.2kg/18.07lbs Package Included 1* Wind Turbine 8* Blades 1* Wind Wheel 1* Controller 1* Anemometer 1* Flange Plate 1* English Manual Other Accessories for Assembly. NotesThis package does not include a tower tube, and we recommend using a steel pipe or iron pipe of 1.65-1.77" in diameter.The wind turbine should be installed where there is strong wind or without tall buildings and obstacles. If installing it near the obstacles, the position is better as far as possible from obstructions, or the installation height should be 20ft higher than the top of obstructions, which can make full use of the wind power. It should avoid the cliff and the turbulent region.The power of the wind turbine will increase with the wind speed. When the wind speed is very low, the wind wheel of the wind turbine will remain stationary. When the cut-in wind speed is reached (usually 3m/s), the wind wheel starts to rotate and the generator starts to generate electricity. As the wind becomes stronger, the output power will increase. When the wind speed reaches the rated wind speed, the wind turbine will output its rated power. After that, the output power will remain roughly unchanged. When the wind speed increases further and reaches the cut-out wind speed, the wind turbine will brake without power output to avoid damage. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Nov 5, 2024 at 18:01:25 PST, seller added the following information:
Price: 228 USD
Location: Los Angeles, California
End Time: 2024-12-04T02:19:37.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
1.Feature *:: Unique Appearance,Great Durability
2.Feature *:: Compact Design,,Convenient Use,
Features *: Duable, high reliability
Brand: Unbranded
Color: White
Material: Nylon Fiber, Die-casting Aluminum Alloy, Neodymium Iron Boron
Process: Plastic Spraying, Die-casting
Shape: Fan-shape, Round
Style: Modern
Special Feature: Durable
Installation Method: Vertical Type
Wind Direction Adjustment: Automatically Adjust the Windward Anglec
Generator Type: 3-Phase AC Permanent Magnet Generator
Braking Method: Electromagnetic
Anemometer Battery: One 3V Lithium Battery(Included)
Number of Blades: 8
Voltage: 12V
Rated Power: 600W
Max. Power: 650W
Start-up Wind Speed: 3m/s
Rated Wind Speed: 13m/s
Safe Wind Speed: 50m/s
Max. Wind Speed: 60m/s
Working Temperature: -40 ~ 80 ℃/-40-176℉
Noise: 40db
Blade Length(Each): 40cm/15.7inch
Blade Diameter(Wheel Included): 92cm/36.22inch
Tower Tube Diameter: 42-45mm/1.65-1.77inch(Not Included)
Package Size: 72*28*23cm/30.7*11.02*9.05inch
Gross Weight: 8.2kg/18.07lbs