6- Easton FMJ Full Metal Jacket 4mm 300 Arrows! Custom Dip/Crested/Blazer Vanes

Description: BRAND NEW, NEVER USED!!!Here are a 1/2 dozen brand new, never used Easton 4mm FMJ Full Metal Jacket Carbon Arrows fletched with the new Bohning Blazer Vanes & a CUSTOM DIP & CREST!! Clamp: Right Helical Clamp at Slight Offset Spine Size 300 Weight: 11.7 gpi Vane: 2" Bohning Blazer Vane Nock: 4mm Nocks Insert: Easton 4mm Aluminum Point Outsert, 50 grains (if aftermarket inserts want to be used, request inserts to be sent loose/uninstalled)NOTE: You must let me know your arrow length. I can not start building your arrows without this information. Let me know the length measuring from inside groove of nock to end of shaft. If you don't need cut, be sure to let me know as well. Inserts will be sent loose on full length arrows, and inserts will be installed on arrows requested to be cut. If you do not want inserts install, you MUST let me know with your arrow length message. I will not start to build your arrows until I have your arrow length specs. The 4MM FMJ offers the most penetration and is precision-made in USA for the most accurate hunting arrow on the market. The 4MM Full Metal Jacket has been updated with a new spine configuration, an all-new 8-32 point outsert system, and a redesigned graphics. The standard 8-32 thread point outsert optimizes front-of-center for easier broadhead tuning and more durability. FMJ starts with an advanced carbon core foundation for lightweight strength. A full metal jacket adds kinetic energy, enhances accuracy, and pulls easier from targets. The combination provides the deepest penetration and more pass-through impacts for quicker kills and heavier blood trails. 4mm Aluminum Point Outsert included (50 grains)4mm Micro- Diameter carbon core with 7075 alloy jacketPre-installed 4mm NocksEasy target PullStraightness +/- .003”Made in the USAThese arrows are custom dipped, crested, and fletched for a unique look and great performance. This is all done by hand, and is not a cheap vinyl stick on wrap.The shafts have been dipped in a white arrow dipping paint. The white dip is unique in that in not only looks great, but helps in shooting. The white dip allows you to watch the arrow fly which is especially helpful when recording a hunt or working on arrow flight. Not to mention, it makes them easier to find!Once the dipping process is finalized and dry, the arrows are placed in a crester. This spins the arrow at a high speed allowing for a unique and custom crest. These arrows are crested with a 2 3/4" crest. The arrows are finished by fletching the dipped and crested shafts by hand in a fletching jig. They are fletched with a Blazer vane by hand, so you won't get a cheap, thin machine-fletch vane. The arrows include three 2" Bohning Blazer vanes. NOTE!!! These arrows are made to order. They are built after payment is received. These arrows do take extra time to build, and with relisting times and quicker buy-now auctions, I at times get behind in the production process. Those bidding on these arrows, please understand that at times the delivery process may be delayed due to the work involved in making these arrows. I can normally have arrows at your door in about two weeks. These are custom built, made to order arrows. HOWEVER, during our busy season, the building to shipping time may even be longer! An ETA can be found on the item's page under "Shipping Details." Please be sure to take this fact into consideration prior to bidding on this item, and when leaving anything but the most positive feedback on shipping time.NO RESERVE!!! CHECK OUT MY OTHER ITEMS IN MY EBAY STORE!!! http://www.stores.ebay.com/rrcherryHAPPY BIDDING!!!

Price: 109.99 USD

Location: Philadelphia, Pennsylvania

End Time: 2024-08-08T20:28:39.000Z

Shipping Cost: 9.99 USD