Description: đ„ă6 Blades heat activated fan for wood stoveăwood stove fan heat powered is composed of 6 blades, upgraded wood stove heat fan blade with curved design and the diameter increased to 164mm which can drive more air circulation when it works, warming your room within maximum efficiency. Upgrade wood fireplace fan heat powered blades are newly proofread which ensure low noise (<25 DB) when operation, never disturb even if you are sleeping or reading, giving you a peaceful atmosphere.đ„ ăUnrivalled performance fireplace fansăEquipped with new generation pure copper generator, balanced output, wood burning stove fan is up to 180 - 210cfm, what more, 6-blade stove top fans working distance can reach 3 meters which is twice more than 3-blade pellet stove fan, with this eco fans for wood stoves, Warm air will be pushed into the room in horizontally rather than simply rises up to the ceiling or being trapped around the stove which maximizes heat distribution throughout the room.đ„ ăThermoelectricity Working PrincipleăThermoelectric fan is a very clever device, as well as what it does with regard to distributing the heat around your home it is also self-powered, the heat powered fan has a small motor inside with two semiconductors, the bottom of the pellet stove fan gets hot from the stove and the top of the stove fans is cooler, the differential between the two drives the motor which in turn rotates the blades of the fireplace fans heat operated.đ„ ăDynamically balanced stove pipe fanăWood stove fans non electric heat powered is made of anodized aluminum which will not rust and corrode in high-temperature and has a higher thermal conductivity efficiency than those steel ones. Operates automatically between 176 - 662°F with self-regulating speed, The temperature gauge included allows you to monitor the stove fan efficiency. This fan for wood stove is small in volume, perfect for all kinds of wood burning stoves, gas stoves, pellet stoves.đ„ăNo Running Cost Cocoon FanăIn times of energy shortage, no batteries or external power required is a great advantage of this fireplace fan non electric which means you don't need extra power tođ„ ăPlace In Right Positionă in order for the wood stove heat fan to get the cool air required to complete the process it needs to be positioned correctly, but not blocking the back of it with a wall or the flue of the stove itself. To the side of the flu and allowing for around 4 inch at the back of it will allow Heat powered stove fan for wood burning stove to get plenty of cool air to work its magic!đ„ ăOverheating ProtectionăWinter cocoon fan for wood stove works most efficiently when gets around 428-572°F, due to bi-metallic strip thermally controlled actuator, non electric fan raises the edge of the fan slightly as temperature is approached to 470°F which will keep the temperature constant in the normal operating temperature range and does not keep rising to the maximum temperature value, protecting the stove fan motor and the thermoelectric module. Specifications:Type:stove fanMaterial:aluminum+electronic componentItem color:blackQuantity:1pcOperating temperature:80-350 degrees CelsiusNoise:<25dBNet weight: 800g Package:1 x 6 Blades Stove fan1 x Thermometers1 x manual1 x package box Note: 1.Place the fireplace fan at least 4 inches away from the chimney, do not place the fan in front of the stove pipe, and make sure the fan base is in direct contact with the heated surface so the fireplace fan gets enough heat to operate. 2.Make sure children and pets are kept away from the fireplace and fireplace fan. 3.Use a furnace thermometer to monitor the operating temperature and do not exceed 350°C (662°F), as high temperatures can cause damage. 4.Do not move it and touch it with your fingers when it is running, and do not move the fan immediately after the work is finished, wait for the fireplace temperature to cool down before moving it. On Nov 5, 2024 at 05:49:30 PST, seller added the following information:
Price: 26.99 USD
Location: El Monte, California
End Time: 2024-12-05T13:30:46.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Initial temperature: 50â-350â
CFM: 1400rpm
Noise: âŠ25db
Blade number: 6
Warranty: Lifetime
Lifetime: Over 50000 hours
Brand: Unbranded
Type: Heat Powered stove fan
Application: Fireplace, Stove
Material: Stainless Steel, Steel +aluminum
Color: Black
MPN: Does Not Apply
Suitable For: Indoor
UPC: Does not apply
EAN: Does not apply