Description: ET3505 ET35 series LCR digital bridges are high-precision component parameter analyzers making use of automatic balancing bridge principle, featuring 10 Hz~1 MHz testing bandwidth, continuously adjustable frequency, 0.05% of basic measuring accuracy, automatic level control, list scanning and position counting, which can provide accurate and complete measurement and analysis for most components and materials, so it is wildly used in product R&D, component incoming inspection and online product sorting. Measured objectsv Passive components: impedance parameter evaluation and performance analysis for capacitors, inductors, magnetic cores, resistors, piezoelectric devices, transformers, chip components and network components.v Semiconductor components: C-VDC characteristics of varactors; analysis of parasitic parameters transistors and integrated circuitsv Other components: impedance evaluation of printed-circuit boards, relays, switches, cables, batteries, etc.v Dielectric materials: dielectric constants and loss angle of plastic, ceramic and other materials; v Magnetic materials: evaluation of magnetic permeability and loss angle of ferrite, amorphous bodies, and other magnetic materialsv Semiconductor materials: dielectric constant, electric conductivity and C-V characteristic of semiconductor materialsv Liquid crystal materials: dielectric constant, elastic constant and other C-V characteristic of liquid crystal unitModel descriptionCategoryModelDescriptionBasic modelET350050 kHZ frequency range, 0.1% basic accuracy, 5 1/2 digit displayET3500A50 kHZ frequency range, 0.05% basic accuracy, 5 1/2 digit displayET3501100 kHZ frequency range, 0.05% basic accuracy, 5 1/2 digit displayBroadband precision modelET3502200 kHZ frequency range, 0.05% basic accuracy, 6 1/2 digit displayET3503300 kHZ frequency range, 0.05% basic accuracy, 6 1/2 digit displayET3505500 kHZ frequency range, 0.05% basic accuracy, 6 1/2 digit displayET35101 MHZ frequency range, 0.05% basic accuracy, 6 1/2 digit display Product featuresv 0.05% basic accuracy or 0.1% basic precisionv A maximum of 200 time/s measuring speedv Frequency measurement range of 10 Hz- 1 MHzv Amplitude of excitation signal 10 mV- 2 V adjustablev Internal programmable DC bias voltagev External additional DC bias voltage supportedv Automatic level adjustment of voltage or currentv V,I testing signal monitoringv 10-point list scanning testingv 10-grade sorting and countingv 256 groups of correcting data for specified frequenciesv 7” LED display screen, Chinese and English menuv USB, Ethernet, RS232, GPIB (not for ET3500), Handler interfaces Main Specifications: ET3510/ET3505/ET3503/ET3502ET3501/ET3500AET3500Measurable parametersCp-D/Q/G/Rp, Cs-D/Q/Rs, Lp-D/Q/G/Rp, Ls-D/Q/Rs, Rs-Xs, Z-θ, Y-θ, G-BMeasurement time mode(Fast/medium)200ms/500ms @ 10Hz100ms/500ms @ 50Hz20ms/200ms @ ≥100HzUser-defined timerange100ms/2000ms @ 10Hz20ms/2000ms @ 50Hz20ms/2000ms @ ≥100Hz5ms/2000ms @ ≥1kHzFrequency(at a step of 1mHz)10Hz-1MHz(ET3510)10Hz-500kHz(ET3505)10Hz-300kHz(ET3503)10Hz-200kHz(ET3502)ET3501: 10Hz-100kHzET3500A: 10Hz-50kHz10Hz-50kHzTesting signal level(At a step of 1mVrms)10mVrms to 2Vrms100μArms to 20mArmsConstant voltage level10mVrms-1VrmsConstant current level100μArms-10mArmsDC bias capacityInternal -2V to +2V voltage biasExternal bias input (within ±60V)NoneInternal resistance of signal source30 Ohm or 100 Ohm, selectableBasic accuracy0.05%0.1%Display resolution6 1/2 digit5 1/2 digit5 1/2 digitComparator 9 groups of qualified setting, one group of unqualified setting, one group of auxiliary settingCalibrationSelf-calibration, open circuit/short circuit frequency sweep, 100 groups of specified frequenciesList scanning100-point list scanning testing100-point list scanning testing100-point list scanning testingStorage deviceInternal/USB storage deviceInternal/USB storage deviceInternal/USB storage deviceRemote controlGPIB, LAN, RS232, USB, HandlerLAN, RS232, USB, Handler, GPIB optionalLAN, RS232, USB, Handler General specifications:Power voltage: 110V/220V.AC ±10%, 50/60Hz;Power consumption: <20W Display: 7” TFT LCD, with a resolution of 800*480Interfaces: Ethernet, RS232, GPIB(not for ET3500), USB and Handler interfacesService environment: 0°C-40°CSizes: 330mm*285mm*136mm (L*W*H) Standard accessories:Three-core power cord (US, Euro, AU or UK plug is available)Kelvin clipsLead-type testing clips (only for ET3503，ET3505，ET3510)Gilded short circuit bar (only for ET3503，ET3505，ET3510) Optional accessories:GPIB cableRS232 serial port lineUSB cable1m/2m test cablePatch testing clipsPatch testing clips (with cable) Note: 1.Will ship to USA via DHL or Fedex (not for PO Box or APO or FPO), delivery time is about 7 days. 2. Will ship via express mail service to Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg, Malta, Norway, Sweden, Swiss, Spain, Italy, UK, Japan, Korea, Thailand, Malaysia, Indonesia, Philippine and Singapore customers. 3. Customers from other countries pls contact us in advance to confirm different shipping charges before you order.
Price: 1463 USD
Location: Shenzhen
End Time: 2024-02-04T00:43:46.000Z
Shipping Cost: 225 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: ET3505
MPN: ET3505
Country/Region of Manufacture: China
Country of Manufacture: China
Brand: generic
Type: LCR or Impedance Meter
