Description: 40% mark down on all DP-220 quill bearings until our inventory is depleted.DELTA 14” DRILL PRESS QUILL BEARINGSTHESE WERE $88 FOR A SET OF TWO. MARKED DOWN BY 40%. NOW SELLING FOR $52 PER PAIRSPECIAL HARD-TO-FIND REPLACEMENT BEARINGS FOR BOTH POSITIONS IN THE QUILLSOLD BY THE PAIRTo rebuild a vintage Delta DP-220 drill press, you will need one pair. These bearings may fit other drill press quills. Check the dimensions or cross reference the Delta part number listed below. These special bearings with the notched internal sleeve lock the inner race of the bearing to the rotating spindle of the drill press. The bearings measure 35MM outside diameter and are sleeved for the .625” diameter spindle shaft. The obsolete Delta part number for this bearing is ND-88100. Each bearing is secured in place in the quill with a special threaded spanner nut # DP-242. It is also very important that the upper bearing drive collar #DP-250 is installed correctly and properly engaged with the bearing. The spanner nuts and the upper bearing drive collar are available in another of our eBay listings Shipping is $6.00 to anywhere in the lower 48 states. Other locations may have to pay an additional shipping fee. Payment by PayPal is preferred.
Price: 52 USD
Location: Freeland, Michigan
End Time: 2024-11-13T20:59:12.000Z
Shipping Cost: 6 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Delta
Model: n/a
MPN: ND-88100
