4 Litre Ready to Use Base Coat Deep Candy Red Metallic Car Paint Lackpoint

Description: Labeling obligation according to the CLP regulation:paint material:Danger!H226 Flammable liquid and vapour.H318 Causes serious eye damage.H315 Causes skin irritation.H335 May cause respiratory irritation.H336 May cause drowsiness and dizziness.H373 May cause damage to organs through prolonged or repeated exposure.You are bidding on 4 liters Ready-to-spray base coatDeep Candy Red Metallic(two-layer paint) !!!NO WATER VARNISH!!!This base coat must be painted over with a 2K clear coat.This is NOT part of this auction.You can find the clear coat you need in our shop. Ideal for painting vehicles, motorcycles, trucks and much more... This base coat/car paint is very easy to work with, it dries quickly and has an elegant appearance at the end.With this base coat/car paint you are up to date, with which you stand out in everyday life and become an eye-catcher. as a gift for you1 mixing cup with scale 1:1 - 5:11 paint sieve 190my1 pair of gloves Easy to process, low material consumption.We guarantee absolutely new goods.The surface should be grease and rust-free (sanded) to enable good adhesion. VOC regulation Please note the new VOC regulation From the 01. January 2007 the changes from the so-called "VOC regulation" (2004/42/EC or 1999/13/EC) take effect. For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, etc., are only used for painting industrial objects. Regardless of these products that can be sold without restrictions, there are some applications according to the law for which the restriction to the range mentioned does not apply, but other products that are not VOC-compliant according to the law may still be sold. These applications are: Restoration of vintage cars, filling, aerosol spray cans, painting of vehicles of the Bundeswehr, civil defense, fire brigade, as well as the forces responsible for maintaining order - painting of vehicles that are used in public service exclusively in urban areas, industrial painting ( e.g. plastic parts not related to the vehicle). According to the law, the distributor is responsible for ensuring that only VOC-compliant products for vehicle painting are sold or also ensure that the products that can only be sold with restrictions are only used for the exceptions mentioned. I hereby confirm that I am familiar with the legal situation of the ChemVOCFarbV and that I have been sufficiently informed about this by Lackpoint -- Robert Braune. I confirm that the products that I purchase from Lackpoint - Robert Braune that do not correspond to the respective VOC limit values will only be used for the exceptional cases provided for by law. The responsibility for the intended sale is hereby passed from Lackpoint -- Robert Braune, to me (buyer).. processingSand the surface to be painted with a P500 random orbital sander or P1000 to 1200 wet sandpaper and then degrease well (silicone remover).When working on new or unpainted plastic surfaces, apply a plastic primer and observe the drying time.Then apply the filler or a primer (1.7 or 1.8mm nozzle size),Processing temperature at least 20°C.Sand the surface well with the appropriate grit of wet sandpaper. smooth.Then clean with silicone remover, the surface must be free of dust (we recommend a tack cloth) and grease. Before applying the paint, check the shade (make a spray sample).Later complaints are not possible.No claim for damages! The 2K or base coats should be processed with a 1.3 or 1.4 mm nozzle size with 2-3 spray coats and even pressure.The temperature should be at least 20°C.The 2K colors are approx. Dust-dry after 20-30 minutes. After 2 days is the 2K paint through dried and fully cured after 4 days.If you are not satisfied with the degree of gloss or want to protect the paintwork, you can apply a 2K clear coat if you wish.In the case of basic colors (ready-to-spray metallic or UNI), after approx. 20-30 minutes flash-off time (color dulls) can be painted over with a 2K clear coat. Everything for the preparation and follow-up for painting work and other great offers are of course also available in our shop.For questions or information, we are at your disposal by phone or e-mail.Contact: Looking for something and can not find it? If you have any questions, we are available Monday to Friday from 8:00 a.m. to 8:00 p.m., get in touch! Bonus!With every paint order, our customers receive a 3-piece starter set for processing, consisting of:a mixing cup with mixing ratio scalea pair of paint glovesa paint strainer Checkout: After winning the auction after 2 hours at the latest, you will automatically receive an email from us with a link to our checkout process. Please refrain from asking us for bank details! These will be communicated to him in the course of the purchase process. Some non-binding processing instructions:Our primer recommendation:We offer epoxy filler primer in our eBay shop. This creates rust protection and a filler structure at the same time. As a rule, these primers or fillers are grey. But that doesn't always work. For example, you should use a white filler for red top coats so that the red tone has a higher brilliance. Likewise, light-colored basecoats or paints with a high pearl content often have low opacity. A primer or the epoxy filler in the subsequent color is required there. Likewise, almost every new car today is already pre-treated on the assembly line with a colored filler, which is also cheaper for small impacts, since the lower layer is the same color as the upper layer of paint. A filler in the color of the car also reduces the amount of final paint required because it covers faster.Our cover recommendation:If partial painting is required, we recommend purchasing our paint-adhesive paint protection hood, which is available in the eBay shop. This wafer-thin hood, resembling a folding garage, is pulled over the vehicle and the section to be painted is cut out and masked. The entire vehicle is masked off quickly and protected from overspray.Coating of plastics:Plastics that have already been painted can easily be painted after roughening. If the existing paint layer has been sanded off or the plastic is raw, a bonding agent must be sprayed. If the plastic is exposed to vibrations, the paint can crack. In this case, 20-30% plasticizer can be added to the last coat of paint. In our eBay shop we offer you high-quality products that guarantee you a good result with professional execution of the work.For paint finishes:Blending in is also referred to as a "spot repair". Apply a small amount of primer and filler to the area to be painted. Adjoining clear coat areas are finely sanded as well. Apply the base coat in thin layers from the inside to the outside so that the paint mist does not settle on the surface. Only use the last coat of paint to apply the base coat from the outside to the inside. Now the clear coat is sprayed over the painted area. Then add 50% fade-out thinner to the clear coat and spray the transition area. Finally spray pure blending thinner again over the entire area and the transition.Uni lacquers in matt:All plain paints (single-layer 2-component paints) are high-gloss. These are usually mixed 2:1 with hardener +15% thinner. All of these 2K uni paints are also available in MATT on request. However, this new trend usually has to be mixed 4:1 with hardener + 50% thinner. The price usually stays the same.Excerpt from our eBay shop range:Vehicle paints, vehicle preparation, VOC-compliant car paints, vehicle polishes, 2K paints, metallic paint, pearl color paint, grinding wheels, occupational safety, spray cans, RAL colors, RAL, foil eraser, paint stand, plastic repair, glass fiber mats, polyester universal putty, polyester repair resin, metallic polyester filling putty, eccentric grinding discs, 9-hole, 6-hole, grinding discs, Sanding mesh, filler, hardener, cleaning paper, masking paper, adhesive tape, fabric tape, thinner, clear coat, effect paint, sanding block, mixing cup, sanding discs, sanding fleece, matting gel, pre-cleaner, adhesive cleaner, wheel rim cleaner, press sponge, carpet cleaner, polishing cloth, control powder, tack cloth, underbody care, UHS, Brilliant clear coat, clear coat From the 01. January 2007 the changes from the so-called "VOC regulation" (2004/42/EC or 1999/13/EC) take effect. For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, etc., are only used for painting industrial objects. Regardless of these products that can be sold without restrictions, there are some applications according to the law for which the restriction to the range mentioned does not apply, but other products that are not VOC-compliant according to the law may still be sold. These applications are: Restoration of vintage cars, filling, aerosol spray cans, painting of vehicles of the Bundeswehr, civil defense, fire brigade, as well as the forces responsible for maintaining order - painting of vehicles that are us

Price: 432.6 USD

Location: Dresden

End Time: 2024-12-29T00:51:51.000Z

Shipping Cost: 195 USD